Jump to content

Serious Windows 7 problem!


Ql1max
 Share

Recommended Posts

Hey guys!

I decided today that I should reinstall my win7. It's all OK untill it starts installing. After a while the installer quits and reports an error (didnt remember it, ill go try install again and post it here) and restarts the computer. It does that at about 50-60% progress. I've had problems with installing windows 7 before, but I always managed to install it successfully afterwards. I am absolutely sure it's not the installation DVD's fault as I installed Windows from the same dvd a few days ago and it worked allright. I'm assu its either RAM, HDD or DVD-ROM that is causing the problem, but I am no expert..

Thanks guys, I hope we can solve this!

Greetings from Slovenia!

 

EDIT: I just ran memtest from widows DVD and it showed nbothing.. Downloading the memtest68+ now, but i'm gonna try the memtest from a linux cd first.

hope that helps!

Edited by Ql1max

Share this post


Link to post
Share on other sites

So you are actually able to run windows? I know its rather irrelevant but if you installed it a couple of days ago, why bother wasting time redoing it?

Have you played with the bios since you last installed it? Try resetting cmos and then trying the installer again.

Also you might need to disconnect from the internet and disable your firewall and anti-virus,as it may be blocking some component.

It would help if you could copy down the error message so we can figure out whats stopping and then whats stopping it.

Good luck.

Share this post


Link to post
Share on other sites

So you are actually able to run windows? I know its rather irrelevant but if you installed it a couple of days ago, why bother wasting time redoing it?

Have you played with the bios since you last installed it? Try resetting cmos and then trying the installer again.

Also you might need to disconnect from the internet and disable your firewall and anti-virus,as it may be blocking some component.

It would help if you could copy down the error message so we can figure out whats stopping and then whats stopping it.

Good luck.

Hey! thanks for the reply!

Actually i didnt install it on my pc, i forgot to mention than xD sorry

I didnt play with BIOS.. didnt oc or anything. I will try resetting cmos and see, will try to dc from the net too, but i doubt it will work because i was able to format the disk and there is no os on it.

Also, I ran memtest for 4h and here are the results

Memtest68+ results:

walltime__cached_rsvdmem_memmap_cache_ecc_test_pass_errors_eccerrs

4:13:00___3839m___160k____e820____on___off___std___5___0___0

 

resetting cmos now, will post results later!

ty!

Share this post


Link to post
Share on other sites

So you are actually able to run windows? I know its rather irrelevant but if you installed it a couple of days ago, why bother wasting time redoing it?

Have you played with the bios since you last installed it? Try resetting cmos and then trying the installer again.

Also you might need to disconnect from the internet and disable your firewall and anti-virus,as it may be blocking some component.

It would help if you could copy down the error message so we can figure out whats stopping and then whats stopping it.

Good luck.

 

Kind of hard to be connected to the internet, disable antivirus and firewall after you have just formatted the drive isnt it? Try a different DVD drive...

Share this post


Link to post
Share on other sites

Kind of hard to be connected to the internet, disable antivirus and firewall after you have just formatted the drive isnt it? Try a different DVD drive...

As I said.. the DVD is 100% working.. I installed Win7 on my friends PC 2 or 3 days ago with the same DVD.. :/

Share this post


Link to post
Share on other sites

Great.

@Roadrunner i missed the formatted bit.

 

Well that is normally done before a proper install so there is no software installed to disable. Been noticing a lot of misleading, stupid stuff on the forums lately...

Share this post


Link to post
Share on other sites

Guys, another problem! :S

I didn't want to make a new topic so I'm posting here.

It's a BSOD PFN_LIST_CORRUPT.

I googled it and people say that it's probably a memory problem, but I ran memtest yesterday for 4h and it showed nothing.. :S

EDIT: Also, programs keep crashing continusly.

I went to event manager and there are multiple errors.

Here are they:

 

 

Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bd212

Faulting module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5be02b

Exception code: 0xc0000374

 

.NET Runtime version 2.0.50727.4927 - Fatal Execution Engine Error (000007FEF5B1FA42) (80131506)

 

 

Faulting application name: CCC.exe, version: 2.0.0.0, time stamp: 0x49ef8e09

Faulting module name: mscorwks.dll, version: 2.0.50727.4927, time stamp: 0x4a27466f

Exception code: 0xc0000005

 

 

Faulting application name: svchost.exe_SysMain, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1

Faulting module name: sysmain.dll, version: 6.1.7600.16385, time stamp: 0x4a5be07e

Exception code: 0xc0000005

 

Faulting application name: svchost.exe_ProfSvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1

Faulting module name: FastProx.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdefe

Exception code: 0xc0000005

 

 

Faulting application name: Dwm.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc541

Faulting module name: uDWM.dll, version: 6.1.7600.16385, time stamp: 0x4a5be06f

Exception code: 0xc000001d

 

Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Desktop Window Manager because of this error.

 

Program: Desktop Window Manager

File:

 

The error value is listed in the Additional Data section.

User Action

1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.

2. If the file still cannot be accessed and

- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.

- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.

3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.

4. If the problem persists, restore the file from a backup copy.

5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.

 

Additional Data

Error value: 00000000

Disk type: 0

 

Faulting application name: svchost.exe_BITS, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1

Faulting module name: FastProx.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdefe

Exception code: 0xc0000005

Fault offset: 0x000000000001489b

Faulting process id: 0x62c

Faulting application start time: 0x01cb67765ad40304

Faulting application path: C:\Windows\System32\svchost.exe

Faulting module path: C:\Windows\system32\wbem\FastProx.dll

Report Id: b3fcf43c-d369-11df-a9c1-e0cb4eeb04de

Edited by Ql1max

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...