A water cooling challenge

[crazy8s846]

I would comment on what ever but, i dont feel like wasteing any more time on either of you.

[Waco]

Sorry i dont drink.

Didn't you say you were posting wasted the other day?

 

 

EDIT: That was this thread...

 

Thanks for pointing that out, im a little wasted, didnt take into account that the water becomes the same temp every where in the loop.

Edited October 3, 2010 by Waco

[endorphiend]

Been putting some thought into it, looking into these parts:

 

Water block: http://www.frozencpu.com/products/10234/ex-blc-712/Heatkiller_Rev_30_1366_CPU_Liquid_Cooling_Block_-_14015.html?tl=g30c325s839#blank

Radiator: http://www.jab-tech.com/Thermochill-PA120.3-pr-3264.html

Pump: http://www.newegg.com/Product/Product.aspx?Item=N82E16835108082

Tubing: http://www.frozencpu.com/products/7182/ex-tub-185/Feser_Tube_Active_UV_Hose_-_12_ID_34OD_Anti-Kink_Tubing_-_UV_Carribean_Blue_-_Limited_Edition.html?tl=g30c99s172

Lighting: http://www.frozencpu.com/products/2998/lit-46/Dual_12_Cold_Cathode_Kit_-_Ultra_Bright_UV.html?tl=g6c75

Reservoir: http://www.frozencpu.com/products/2218/ex-res-69/Innovatek_Tank-O-Matic_-_External_Reservoir_-_BLACK_500692.html?tl=g30c97#blank

 

Any thoughts/suggestions?

 

I'm going to pull the trigger on it when I end up selling my old computer, hopefully in the next month or so.

[Drdeath]

Been putting some thought into it, looking into these parts:

 

Water block: http://www.frozencpu...0c325s839#blank

Radiator: http://www.jab-tech.....3-pr-3264.html

Pump: http://www.newegg.co...N82E16835108082

Tubing: http://www.frozencpu...l?tl=g30c99s172

Lighting: http://www.frozencpu...V.html?tl=g6c75

Reservoir: http://www.frozencpu...tl=g30c97#blank

 

Any thoughts/suggestions?

 

I'm going to pull the trigger on it when I end up selling my old computer, hopefully in the next month or so.

 

 

The block/res/pump is my setup. It performs wonderfully. You will enjoy it. IMO you will need another rad for the 2 x 480's. They pull a lot of watts to dissapate. We have been though this earlier. The 480's will pull a minimum of 300W ea.... and probably much more! and if you overclock a i7 with high voltage , you can be about 300W or more depending on overclock and voltage. the MCP655 will handle another rad.

 

 

Radiator Heat Dissipates Capacity Chart

- Single 120.1 = 150w

- Dual 120.2 = 300w

- Triple 120.3 = 450w

- Quad 120.4 = 600w

 

 

 

Here is a link that will affirm it from Danger Den..

http://www.dangerden.com/forums/viewtopic.php?f=7&t=11709

Edited October 5, 2010 by Drdeath

[endorphiend]

The block/res/pump is my setup. It performs wonderfully. You will enjoy it. IMO you will need another rad for the 2 x 480's. They pull a lot of watts to dissapate. We have been though this earlier. The 480's will pull a minimum of 300W ea.... and probably much more! and if you overclock a i7 with high voltage , you can be about 300W or more depending on overclock and voltage. the MCP655 will handle another rad.

 

 

Radiator Heat Dissipates Capacity Chart

- Single 120.1 = 150w

- Dual 120.2 = 300w

- Triple 120.3 = 450w

- Quad 120.4 = 600w

 

 

 

Here is a link that will affirm it from Danger Den..

http://www.dangerden.com/forums/viewtopic.php?f=7&t=11709

Just doing the CPU for now, gonna figure out the GPUs later. Good to know I picked solid performers!

 

Question: Where did you mount the res?

[Drdeath]

Just doing the CPU for now, gonna figure out the GPUs later. Good to know I picked solid performers!

 

Question: Where did you mount the res?

 

 

I have a tech station so I cannot help you there. I use a Swiftech Micrors. It is small and easy to install. Yours will require more attention. I chose the microres cause it is easy to install high so the air bleeds easily especially inside a case.

Edited October 5, 2010 by Drdeath