crazy8s846 Posted October 3, 2010 Posted October 3, 2010 I would comment on what ever but, i dont feel like wasteing any more time on either of you. Share this post Link to post Share on other sites More sharing options...
Waco Posted October 3, 2010 Posted October 3, 2010 (edited) Sorry i dont drink. Didn't you say you were posting wasted the other day? EDIT: That was this thread... Thanks for pointing that out, im a little wasted, didnt take into account that the water becomes the same temp every where in the loop. Edited October 3, 2010 by Waco Share this post Link to post Share on other sites More sharing options...
endorphiend Posted October 5, 2010 Posted October 5, 2010 Been putting some thought into it, looking into these parts: Water block: http://www.frozencpu.com/products/10234/ex-blc-712/Heatkiller_Rev_30_1366_CPU_Liquid_Cooling_Block_-_14015.html?tl=g30c325s839#blank Radiator: http://www.jab-tech.com/Thermochill-PA120.3-pr-3264.html Pump: http://www.newegg.com/Product/Product.aspx?Item=N82E16835108082 Tubing: http://www.frozencpu.com/products/7182/ex-tub-185/Feser_Tube_Active_UV_Hose_-_12_ID_34OD_Anti-Kink_Tubing_-_UV_Carribean_Blue_-_Limited_Edition.html?tl=g30c99s172 Lighting: http://www.frozencpu.com/products/2998/lit-46/Dual_12_Cold_Cathode_Kit_-_Ultra_Bright_UV.html?tl=g6c75 Reservoir: http://www.frozencpu.com/products/2218/ex-res-69/Innovatek_Tank-O-Matic_-_External_Reservoir_-_BLACK_500692.html?tl=g30c97#blank Any thoughts/suggestions? I'm going to pull the trigger on it when I end up selling my old computer, hopefully in the next month or so. Share this post Link to post Share on other sites More sharing options...
Drdeath Posted October 5, 2010 Posted October 5, 2010 (edited) Been putting some thought into it, looking into these parts: Water block: http://www.frozencpu...0c325s839#blank Radiator: http://www.jab-tech.....3-pr-3264.html Pump: http://www.newegg.co...N82E16835108082 Tubing: http://www.frozencpu...l?tl=g30c99s172 Lighting: http://www.frozencpu...V.html?tl=g6c75 Reservoir: http://www.frozencpu...tl=g30c97#blank Any thoughts/suggestions? I'm going to pull the trigger on it when I end up selling my old computer, hopefully in the next month or so. The block/res/pump is my setup. It performs wonderfully. You will enjoy it. IMO you will need another rad for the 2 x 480's. They pull a lot of watts to dissapate. We have been though this earlier. The 480's will pull a minimum of 300W ea.... and probably much more! and if you overclock a i7 with high voltage , you can be about 300W or more depending on overclock and voltage. the MCP655 will handle another rad. Radiator Heat Dissipates Capacity Chart - Single 120.1 = 150w - Dual 120.2 = 300w - Triple 120.3 = 450w - Quad 120.4 = 600w Here is a link that will affirm it from Danger Den.. http://www.dangerden.com/forums/viewtopic.php?f=7&t=11709 Edited October 5, 2010 by Drdeath Share this post Link to post Share on other sites More sharing options...
endorphiend Posted October 5, 2010 Posted October 5, 2010 The block/res/pump is my setup. It performs wonderfully. You will enjoy it. IMO you will need another rad for the 2 x 480's. They pull a lot of watts to dissapate. We have been though this earlier. The 480's will pull a minimum of 300W ea.... and probably much more! and if you overclock a i7 with high voltage , you can be about 300W or more depending on overclock and voltage. the MCP655 will handle another rad. Radiator Heat Dissipates Capacity Chart - Single 120.1 = 150w - Dual 120.2 = 300w - Triple 120.3 = 450w - Quad 120.4 = 600w Here is a link that will affirm it from Danger Den.. http://www.dangerden.com/forums/viewtopic.php?f=7&t=11709 Just doing the CPU for now, gonna figure out the GPUs later. Good to know I picked solid performers! Question: Where did you mount the res? Share this post Link to post Share on other sites More sharing options...
Drdeath Posted October 5, 2010 Posted October 5, 2010 (edited) Just doing the CPU for now, gonna figure out the GPUs later. Good to know I picked solid performers! Question: Where did you mount the res? I have a tech station so I cannot help you there. I use a Swiftech Micrors. It is small and easy to install. Yours will require more attention. I chose the microres cause it is easy to install high so the air bleeds easily especially inside a case. Edited October 5, 2010 by Drdeath Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now