trax[qr] Posted April 4, 2010 Posted April 4, 2010 My rig: OS: Windows 7 32-Bit SP1 Mobo: Gigabyte EP31-DS3L Processer - Intel Quad Core Q9400 @ 2.66 GHz default RAM: 2048 MB RAM DDR2 Graphics Card: ATI Radeon 5770 HD Hey guys I'm new to this forum aswell as Overclocking lately I've been trying to Overclock my Q9400 to 3.0ghz at least on a EP31-DS3L but no luck so I looked on forums and etc and I've seen lots of threads saying that this certain motherboard is very bad for OCing.. But my problem is, I got into BIOS and change the multiplier to 8x and up the FSB to anything higher then default and save then reboot, then i try to get into the BIOS once again and check, my custom FSB has been disabled which means it remains its default and the multipler remains at 6x - 2.00GHz I've tried a lot of little OC even 8x335MHz only also cannot.. MB Intelligent Tweaker (M.I.T) Robust Graphics Booster [Auto] CPU Clock Ratio [8x] Fine CPU Clock Ratio [+0.0] CPU Frequency 2.66 GHz (333x8) CPU Host Clock Control [Enabled] CPU Host Frequency (MHz) [333] PCI Express Frequency (MHz) [100] C.I.A.2 [Disabled] Performance Enhanced [standard] System Memory Multiplier (SPD) [Auto] Memory Frequency (MHz) 800 800 **** System Voltage not Optimized !! **** System Voltage Control [Manual] DDR2 Overvoltage Control [Normal] PCI-E Overvoltage Control [Normal] FSB Overvoltage Control [Normal] (G) MCH Overvoltage Control [Normal] CPU Voltage Control [Normal] Normal VPU Vcore 1.28750V Advanced BIOS features HDD Smart Capability [Disabled] Limit CPUID Max. to 3 [Disabled] No - Execute Memory Protect [Enabled] CPU Enhanced Halt (C1E) [Enabled] CPU Thermal Monitor 2 (TM2) [Enabled] CPU EIST Function [Enabled] Virtualization Technology [Enabled] Init display first [PCI] Integrated Periphals On-Chip Primary PCI IDE [Enabled] On-Chip Sata Mode [Enhanced] Legacy USB Storage Detect [Enabled] PC Health Status Vcore 1.268V DDR18V 1.936V Current System Temp 38C Current CPU Temp 73C CPU Fan Speed 2445 RPM Current System Fan1 Speed 1254 RPM Current System Fan2 Speed 1182 RPM Current Power Fan Speed 0 RPM I had to write and type all this . out lol so please help would be appreciated - I am to get at least 3.0GHz Cheers Share this post Link to post Share on other sites More sharing options...
gotdamojo06 Posted April 4, 2010 Posted April 4, 2010 When an overclock fails it will reset the bios settings with most motherboards...this is most likely what is happening with yours...small increases in the fsb until it becomes unstable with a stress tester such as prime95 is the way to go and avoid this issue Share this post Link to post Share on other sites More sharing options...
joel.monteiro Posted April 4, 2010 Posted April 4, 2010 this might be bios problem ,normally such problems are solved by updating the bios, use the gigabyte Q-flash its there in the bios. Share this post Link to post Share on other sites More sharing options...
trax[qr] Posted April 5, 2010 Posted April 5, 2010 this might be bios problem ,normally such problems are solved by updating the bios, use the gigabyte Q-flash its there in the bios. My bios is fully up to date so it's not that could anyone give me proper settings to my bios so that I can overclock it? :S Share this post Link to post Share on other sites More sharing options...
odex Posted April 15, 2010 Posted April 15, 2010 try disable CPU Enhanced Halt (C1E) and CPU EIST Function Share this post Link to post Share on other sites More sharing options...
trax[qr] Posted April 18, 2010 Posted April 18, 2010 *bump* any more suggestions the previous ones dont work Share this post Link to post Share on other sites More sharing options...
RJR Posted April 18, 2010 Posted April 18, 2010 Are you trying to OC with the stock cpu heatsink? Share this post Link to post Share on other sites More sharing options...
trax[qr] Posted April 25, 2010 Posted April 25, 2010 Are you trying to OC with the stock cpu heatsink? yes i am Share this post Link to post Share on other sites More sharing options...
joel.monteiro Posted April 25, 2010 Posted April 25, 2010 wht are ur temps on stock? Share this post Link to post Share on other sites More sharing options...
KK_ Posted April 25, 2010 Posted April 25, 2010 (edited) Current CPU Temp 73C bit high but 3ghz is very achievable with that chip, im going to probably get my Q8400 a stable 3.4ghz soon Edited April 25, 2010 by KK_ Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now