llhuskyll Posted April 2, 2010 Posted April 2, 2010 (edited) too high? wont see much difference with 3.8ghz or 4ghz? Edited April 2, 2010 by llhuskyll Share this post Link to post Share on other sites More sharing options...
Onion Posted April 2, 2010 Posted April 2, 2010 Depends on what chip it is. We'll need more info. If its a 65 nm one, I'd say you're fine as long as the temps are good. Share this post Link to post Share on other sites More sharing options...
llhuskyll Posted April 2, 2010 Posted April 2, 2010 Depends on what chip it is. We'll need more info. If its a 65 nm one, I'd say you're fine as long as the temps are good. oh sorry its an 45. e8500 Share this post Link to post Share on other sites More sharing options...
Puck Posted April 2, 2010 Posted April 2, 2010 oh sorry its an 45. e8500 I run my 45nm wolfdale at the same vcore 24/7, 1.39. You'll be fine there, but I consider that the limit for 24/7 voltage even if your temps are fine. Degradation may become an issue at higher then 1.4 vcore. Share this post Link to post Share on other sites More sharing options...
PatRaceTin Posted April 2, 2010 Posted April 2, 2010 VCore is very vary from cpu to cpu if your cpu is really require that Vcore @ specific Ghz it is normal Share this post Link to post Share on other sites More sharing options...
dihartnell Posted April 2, 2010 Posted April 2, 2010 Its fine as long as your temps are ok. My e8500 manages 4.275GHz at 1.36 but they can vary. Share this post Link to post Share on other sites More sharing options...
llhuskyll Posted April 4, 2010 Posted April 4, 2010 thx for all your reply. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now