aruba92 Posted March 5, 2010 Posted March 5, 2010 AI Tweaker Manual CPU Ratio 20 BCLK Freq. 160 Dram Freq 1604 QPI/Dram 1.375 volts Dram 1.66 volts Speedstep and Spread Spectrum Disabled All others in AUTO. When running prime95 system BSOD's instantly. Any advice would be appreciated. By the way the i7-920 is a C0 Revision if that makes any difference. Share this post Link to post Share on other sites More sharing options...
RobBan-Swe Posted March 5, 2010 Posted March 5, 2010 Try: cpu 1,3-1,32v for stability,,, i7 need volt to work ok And lower the qpi to 1,35v raise IOH to 1.2v (not pcie-IOH) and low the dram volt to 1,64v B:) RobBan Share this post Link to post Share on other sites More sharing options...
dling Posted March 6, 2010 Posted March 6, 2010 Change the memory from 2/10 to 2/8 in the bios. As you start increasing the multiplier in will also increase your memory speeds. 200x20 would give 2x800= 1600 . So drop the 2/10 to 2/8 and move up slowly. Only increase voltages as necessary. Do that and I think you will be off to a good start. Share this post Link to post Share on other sites More sharing options...
dling Posted March 6, 2010 Posted March 6, 2010 Heres a look at mine. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now