mathewRS Posted November 25, 2009 Posted November 25, 2009 ok well first off i gave it a quick go and didnt get much out of it ... im running nothing special... asus m2n32 wifi amd 64x2 6000+ 4gig patriot ddr800 with upto date bio and im running full cpu, nb, sb water cooling help needed lol Share this post Link to post Share on other sites More sharing options...
overclocking101 Posted November 25, 2009 Posted November 25, 2009 (edited) can you post your bios settings? first thing to do is up the cpu voltage and nb/ht voltage a few steps and the move your fsb/ht up from 200 (i think 200 is the base for amd) to 215/220 check for stability and if its stable keep uping the fsb a tad till it becomes a bit unstable then add a little more volts. are you running water cooling on the cpu as well? EDIT im an idiot i see you are running cpu water cooling duoh! Edited November 25, 2009 by overclocking101 Share this post Link to post Share on other sites More sharing options...
MJCRO Posted November 25, 2009 Posted November 25, 2009 (edited) EDIT: Forgot about this, LOL WELCOME TO OCC Ok, if you've got full w/c on the NB/SB/CPU, then I think your set to OC quite a bit. OC'ing those older 6xxx X2's is very easy. I would recommend right off the bat setting the voltage to stock, and raising the base clock from 200 to 203 and keep raising in increments of 3 Mhz until to hit instability such as not being able to boot up to POST or Windows. Then you add a bump in voltage from stock to .50+ volts. Repeat both steps until you can no longer boot into Windows or post properly. Use programs such as: - OCCT: System testing - Prime95: CPU testing - SpeedFan: to record temps and make sure there ~60C at least. - CPU-Z: to record changes in voltage @ load & for Vdroop. Personally I can tell you right now, don't expect to hit more than 3.5-3.6 Ghz at the most, those chips don't OC very well. Edited November 25, 2009 by MJCRO Share this post Link to post Share on other sites More sharing options...
Boinker Posted November 26, 2009 Posted November 26, 2009 Here is varrens guide to overclocking in general. its a good guide to read just due to informitives. enjoy. it helped get me going.. Share this post Link to post Share on other sites More sharing options...
mathewRS Posted November 27, 2009 Posted November 27, 2009 ok thanks alot and yea i got the voltage and stuff ... but i got to 250 and it wont boot :/ there are loads of settings int here :/ i think i got a few screens ill upload them if u guys want so u can takes a look at them and thanks for ya help i got the cpu at 3.3ghz atm via the ai overclock 10% thing :/ http://www.megaupload.com/?d=C4YXWRMT there are the bios screens and my cooling loop Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now