paradoxdream Posted October 2, 2009 Posted October 2, 2009 (edited) Hi long time reader first post in a long time, :thumbs-up: I decided to OC my Dragon System PII X3 720 BE (first real CPU OC ever) I went and bought A new cooler the CoolerMaster Hyper TX3 90mm and installed it and now I can't put my ram at stock speeds. I manually put all the ram info in the BIOS the same values that worked just fine for a while now. I don't understand how just changing the cooler would make my system not boot at stock settings It would just go to the ASUS post screen saying that my OC had failed even though I wasn't OC at this point. (DDR3 1333 OCZ HPC 6-6-6-20 2*2GB Dual channel) I had to under clock the ram to 1066 to get it to boot. So after being annoyed by the fact that I spent $$ and had to tare apart my tower to install every thing and that CoolerMaster gives you essentially bent paper clips to install the CPU fan and I had to look up a video and watch It like 5 times to figure how to install the CPU fan I decided to keep the ram at 1066 and up the FSB. I got it to CPU 15*225 3375Mhz @ 1.400v and the Ram 1200Mhz 6-6-6-20 1.76v (stock volts) Stable using OCCT , Prime 95, Folding @ home And playing games for a long while. All temps are good CPU Core *3 = 19 idol 28 load Motherboard = 30 idol 33 load One thing I did notice was before the cooler the CPU volts were around 1.3 (BIOS auto set) and after the cooler the CPU volts were 1.425 (BIOS auto set) I got paranoid and lowered it to 1.4v I am not sure if its just me but the system doesn't seam that much faster not sure if I was just expecting to much like some thing from minority report or some thing Now my questions are 1.how can I get my ram at the stock 1333 and boot so I can OC the ram to 1400+ 2.Why did it get all weird when all I did was change the cooling 3.is their a noticeable performance hit from DDR3 1333 to 1200 with the CPU overclocked 4. Why is the DRAM : Ratio different in everest from CPU-Z (everest = 16.6 CPU-Z = 3.8) 5. How is this as my first real CPU OC (good /bad/ok?) Thanks for reading this the system Info is as follows CPU-Z1 CPU-Z 2 Everest 1 Everest 2 System spec: Antec 900 (2 front fans at medium top and rear at hi) ASUS M4A78T-E MB (September 09 BIOS) AMD PII X3 720 BE @ 3375Mhz 15*225 1.400v CoolerMaster Hyper TX3 90mm OCZ Reaper HPC 10666 DDR3 1333Mhz 6-6-6-20 @ 1200Mhz 6-6-6-20 1.76v Sapphire HD4870 Toxic 1Gb DDR5 805/1015 West digital 640Gb Blue 7200 Sata3 16Mb West digital 1Tb Green 7200 Sata3 8Mb LG DVD combo Drive Sata3 Corsair 520HX 520w Edited October 2, 2009 by paradoxdream Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now