MstJuan Posted July 12, 2009 Posted July 12, 2009 Starting Cutting the work. Here is the top part which will be used as a filling point. Here is the bottom part which will be used for two functions one is to hold the top part and one to make it hide. More to come.... Share this post Link to post Share on other sites More sharing options...
MstJuan Posted July 16, 2009 Posted July 16, 2009 Today i started Cutting parts of my case. here are the photos. Bottom Part of the fridge. Top Part here are more photos. i also stayed building the optical drive base which will hold the optical drive in place, The material Used is PVC sheet. Here is how it fits.. And here is how the Optical Drive will fit. ( This drive i am using is just for measurements only.) Share this post Link to post Share on other sites More sharing options...
Timmy94 Posted July 20, 2009 Posted July 20, 2009 Looking good Share this post Link to post Share on other sites More sharing options...
MstJuan Posted July 20, 2009 Posted July 20, 2009 (edited) Progress on work: The fridge door in here i will be housing the HD i will be using one or two i still don't know but the door takes two. I am also planing to install four fans two inflow of 80mm each and two out flow of 92mm each plus i also used two Alloy ( alumina and manganese ) heat sinks so to cool more the hard drive Out side ( still a lot to do to make it nice). Inside part with out the drive everything will be secured batter since for now i just fixed everything with hot glue to see the measurements. Al so i have been working on the front part of the fridge it' self there will be the rest of the components. I will be using white pvc to hold the perspex in between. at the bottom you will see a piece of plastic that represents the inner pvc that will act like a fails floor to make everything suspended. Here i was thinking of making the main board and i just placed in place for measurement purposes only. Edited September 3, 2009 by MstJuan Share this post Link to post Share on other sites More sharing options...
MstJuan Posted July 20, 2009 Posted July 20, 2009 Looking good thanks a lot timmy if you have any idea. your welcome. Share this post Link to post Share on other sites More sharing options...
MstJuan Posted September 4, 2009 Posted September 4, 2009 Hi Mates, Today i am continuing on developing on the mod, i started thinking how to conclude this mode and i started buy cosing our the outer cosmetics. On the upper part we have an opening here i opined it a little more. here is the photo. Before: After: After this was done i was thinking of making some grill with metal but after thinking enough about it i have realized that the amount of work involved would be a lot and the final product would not be as nice as i would like. After looking about at home i found some perspecs. then with the computer i made a small cooler master writing to use it as a background for when i am cutting the perspecs. After cutting the cooler master, cutting i have put some liquier on the paper so i harden it a little . While the paper was drying i went working on fitting the fan on the perspecs here is the material. here i fitted the perspecs. here i was fitting the thing on the fridge. putting everything togher. and started cutting. Share this post Link to post Share on other sites More sharing options...
MstJuan Posted September 4, 2009 Posted September 4, 2009 I started today by having a mishap, yesterday i was doing that cooler master, the second o and ther e of master broke in my hands. here is a piturce. Now i had to think what the hack i should do. mean while so i don't loose time. i wanted to test the paint factor,in this test i have sended half the perspecs to see the effect of the paint. The Paint used. After the test i thought of using glue to hold from the back side and then i continued on working on the rest of the words, after that i painted. Final result of the first part of paiting. during the drying time i started working on the other fan which is on the hd's compartments. which is situated in the door. It's the single fan After taking the measurements needed i started building the the guide and the sides of the fan here is a photo of the cuttings. here is the guide picture with the fan and with all the holes drilled. I will be passing the wire of the fan under the hd heatsink so like this i will not have to make any other holes. now that i am sure of everything i started sticking the part to the door. using a common sealer. Now it time for the upper part of the same door. here is a pic of the corners. After taking all the measurements needed and thinking of how the hack i am going to make this part. and here is the idea i had in mind. here is a picture. Mates i am uploading this log here for your enjoyment also this log is on cooler master forum where i shell be contesting under the unique section. Share this post Link to post Share on other sites More sharing options...
MstJuan Posted September 8, 2009 Posted September 8, 2009 Her is today's log which i took long today since i needed to think for the future. This morning i started doing the bottom tray here is anther pictures. nearly finished but stopped here till the wiring is done. Share this post Link to post Share on other sites More sharing options...
MstJuan Posted September 8, 2009 Posted September 8, 2009 he i continued on sticking the modo tray here is a picture fixed with hot glue all round. After the tray was ready i had to make something one the back of the fridge because if you can notice i don't have enough space to close everything and have the cables in a way that will stay confy. so i started creating a back extension , actually this will act like a shutter for the sealer. Below you will find a step by step photos. after this is where i found a foul the fault is that i have corners there while the shape is round therefore i found this solution this will hold the sealer in place. Share this post Link to post Share on other sites More sharing options...
MstJuan Posted September 8, 2009 Posted September 8, 2009 after that i started on the front side this looks like a photo frame lol. here is already done but not fixed i will seal it as the last thing before the final paint. a photo from the inside More to come during the week Share this post Link to post Share on other sites More sharing options...
Baulten Posted September 8, 2009 Posted September 8, 2009 Keep up the good work; it's coming together nicely. Hope the final build looks nice and clean. Share this post Link to post Share on other sites More sharing options...
MstJuan Posted September 8, 2009 Posted September 8, 2009 thanks mate Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now