rud3bwoy Posted May 28, 2009 Posted May 28, 2009 (edited) ill let prime run for a few hours at this vcore and see whats up. yes qpi is set to 1.3000 vcore is uber low tho lol how long to run prime to see if the ram is stable here?so far doing good at this super low volts lol Edited May 28, 2009 by rud3bwoy Share this post Link to post Share on other sites More sharing options...
Rockrtx Posted May 28, 2009 Posted May 28, 2009 If you want to check ram stability run memtest. I run PRIME95 for 1-2 hours for stability,i think more time than that is overkill,you will never stress your cpu that much even if you are hardcore gamer. Share this post Link to post Share on other sites More sharing options...
rud3bwoy Posted May 28, 2009 Posted May 28, 2009 yea ill run2 hours and see whats good so far have been 1 hour i upped the voltages a bit 1.064 and doing good here Share this post Link to post Share on other sites More sharing options...
Nuclear Posted May 28, 2009 Posted May 28, 2009 yea ill run2 hours and see whats good so far have been 1 hour i upped the voltages a bit 1.064 and doing good here Do you have speed step and the necessary options enabled? Are you checking your vcore during a Prime95 load? Share this post Link to post Share on other sites More sharing options...
rud3bwoy Posted May 28, 2009 Posted May 28, 2009 its stable i ran prime 95 for 3 hours the vcore listed on top that i notched it up to did the trick =) Share this post Link to post Share on other sites More sharing options...
Nuclear Posted May 28, 2009 Posted May 28, 2009 its stable i ran prime 95 for 3 hours the vcore listed on top that i notched it up to did the trick =) The reason I asked was because it sounds like you have speedstep enabled, which can cause the vcore and CPU speed to drop significantly once the system is sitting idle. If you are only checking the vcore at idle that explains why you think its set so low, the range you listed is perfect for the power-saving modes. Share this post Link to post Share on other sites More sharing options...
rud3bwoy Posted May 28, 2009 Posted May 28, 2009 na all that stuff was turned off,i guess i just needed to up the vcore 2 notches up. i assume if i was to run at 2.6 i can get it lower lol Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now