AR-fatality Posted November 17, 2008 Posted November 17, 2008 im overclocked my E2140 from 1.6 to 3Ghz and ive manually increased the cpu vcore to 1.3v. Its more or less stable now but i'l be doing more stability tests. But CPU-Z shows that my processor is running at 2800Mhz [350*8] even though its actually running at 3000mhz [375*8]. I have updated cpu z to make sure that the problem isnt with the particular version. The Cpu Vcore is also shown as 1.248 where it should be 1.3v. Help me out please Share this post Link to post Share on other sites More sharing options...
ARandomOWL Posted November 17, 2008 Posted November 17, 2008 The vcore in CPUZ will be lower because of vdroop but I'm not sure about the bus speed. Share this post Link to post Share on other sites More sharing options...
Praz Posted November 17, 2008 Posted November 17, 2008 Post this in the CPU-Z forum. Franck will probably need you to send him the dump file to get it sorted. CPU-Z Forum Share this post Link to post Share on other sites More sharing options...
Error 404 Posted November 17, 2008 Posted November 17, 2008 Did you turn off Speedstep? If not, try running a CPU-intensive app, and if it increases, turn SS off. Also, use a program other than CPU-Z - See what it says. ~Error Share this post Link to post Share on other sites More sharing options...
Praz Posted November 17, 2008 Posted November 17, 2008 But CPU-Z shows that my processor is running at 2800Mhz [350*8] even though its actually running at 3000mhz [375*8]. Did you turn off Speedstep? If not, try running a CPU-intensive app, and if it increases, turn SS off. Also, use a program other than CPU-Z - See what it says. ~Error SpeedStep would cause the multiplier to decrease to 6x not change the FSB. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now