Zertz Posted September 27, 2008 Posted September 27, 2008 I try not to use more voltage than I need so yeah, drop it to like 1.4V, if it's still stable try a little lower and so on Share this post Link to post Share on other sites More sharing options...
rud3bwoy Posted September 27, 2008 Posted September 27, 2008 well trying 1.42 now i know lower than that it is unstable if it is stable there will leave it if not back to 1.44 Cooling Fans GPU1 2630 RPM GPU3 2617 RPM Voltage Values CPU Core 1.21 V +3.3 V 3.20 V +5 V 4.75 V +12 V 12.15 V +5 V Standby 4.85 V FSB VTT 1.39 V North Bridge Core 1.42 V South Bridge Core 1.07 V South Bridge PLL 1.52 V DIMM 1.97 V DIMM VTT 0.99 V Current Values CPU 71.31 A GPU1: GPU VRM 10.16 A GPU2: GPU VRM 12.19 A GPU3: GPU VRM 25.74 A GPU4: GPU VRM 12.19 A Power Values CPU 78.78 W anything looks like it should be lowered here? Share this post Link to post Share on other sites More sharing options...
Compxpert Posted September 27, 2008 Posted September 27, 2008 Hmm dunno why you run temps that high. 4.113ghz stable is only at 1.55 volts here. Though i think everest might be wrong because I'm pretty sure its set to 1.45. X38 though but there isn't too much difference between X38 and X48. Mines at 53C full load on air. Share this post Link to post Share on other sites More sharing options...
rud3bwoy Posted September 27, 2008 Posted September 27, 2008 yea 1.45 sorry anyway i am stable on the nb at 1.42 i believe..... or 1.43 w.e it reports.... my room was kind of hot as i had my 46 inch running,with my pc and lcd monitor 24/7 and of course those gpus don't make the room any cooler turned my ac on to get the room in a good temp as it is to hot in here nb is at 60 with the voltages there highest it will go on idle with room temp hot is 66 c and drops down to 62 c i guess the room temps at time effect it a lot. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now