ReMoose Posted April 19, 2006 Posted April 19, 2006 I recently switched from a ultra-d to a sli-dr and now i cant oc at all. Its stock or die. I turn up the voltage, it doesnt help. I mess with the multplier and it doesnt help . im at a loss now, i had my 4200 running 2.6 on my ultra-d and now i cant budge it past stock on a sli-dr. btw sli-dr is rev. AD0 Share this post Link to post Share on other sites More sharing options...
red930 Posted April 19, 2006 Posted April 19, 2006 Hmm.....which Bios version are you running for that board? Well, the Ultra-D is very different compared to SLI-DR if you didn't notice. Just because you can overclock to 2.6GHz doesn't mean you can reach that high with another board, but in your case that is very odd not being able to overclock at all. Share this post Link to post Share on other sites More sharing options...
red930 Posted April 19, 2006 Posted April 19, 2006 Is it stable at stock settings on your new board? Share this post Link to post Share on other sites More sharing options...
red930 Posted April 19, 2006 Posted April 19, 2006 That's a very good point, Techno. Share this post Link to post Share on other sites More sharing options...
ReMoose Posted April 19, 2006 Posted April 19, 2006 solid at stock so far. 6-23 BIOS - i was thinking about flashing to the latest but havent yet as ive only had the board for 2 days. Share this post Link to post Share on other sites More sharing options...
Alien_Hitter Posted April 19, 2006 Posted April 19, 2006 which revision of the cpu are you using? Share this post Link to post Share on other sites More sharing options...
Burky Posted April 19, 2006 Posted April 19, 2006 Have you installed the AMD X2 fix for the motherboard yet. I also hope you re-installed your OS since getting your new board. If you don't you're just asking for troubles sooner or later. I also recommend reformatting the partition too, but not so important. Share this post Link to post Share on other sites More sharing options...
ReMoose Posted April 19, 2006 Posted April 19, 2006 reformat and reinstall done when board was installed. the x2 fix for the mobo? 6-23 bios is the only thing that i know of related to these boards and x2 fixes... Share this post Link to post Share on other sites More sharing options...
Burky Posted April 19, 2006 Posted April 19, 2006 There definately was some sort of a fix or driver over on AMD's website, but I looked and found nothing. Maybe someone else can post the link for you. Share this post Link to post Share on other sites More sharing options...
Thraxz Posted April 19, 2006 Posted April 19, 2006 I had a weird issue like that too. I had to unplug my computer and turn off the switch for a good eight hours. When I turned it back on... it worked again. Weirdest . ever. Maybe it'll work for you. Share this post Link to post Share on other sites More sharing options...
ReMoose Posted April 20, 2006 Posted April 20, 2006 Apparently the SLI-DR doesnt like to run my ram at 1T like my ultra-d did. disabled cpc and i havent had any instability problems yet. I wonder if i should switch ram slots and try again as right now im using the yellows. I know that it doesnt matter but eh anything is worth a shot. i only jumped up to 210x11 but no problems unlike earlier so i think CPC was the source of my problems. Time to get back to 2.6 then hopefully higher tonight. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now