Hynix 43 on Ultra-D

[inspector-71]

Anyone else using geil platinum pc4200 or other hynix 43 ram on a dif nf4 ultra-d or similar?

 

I ma having problems getting above say 230 fsb in 1:1. The ram has just come of my nf3 board and does 263 no probs. The board is also fine at 263 fsb on a divider.

 

Could someone post their bios settings?

 

I have tried a few suggestions so far but with no joy.

[alesss]

Try here

 

http://www.dfi-street.com/forum/showthread.php?t=20823

 

http://www.dfi-street.com/forum/showpost.p...179&postcount=4

[inspector-71]

Try here

 

http://www.dfi-street.com/forum/showthread.php?t=20823

 

http://www.dfi-street.com/forum/showpost.p...179&postcount=4

 

thanks for links but I have already read them. I am looking for some 'in use' settings from someone using similar ram.

[smolt]

Your not gonna find much help here on the street Sorry to say.Corsair Has got an Unjustafided bad rap here on the street And on top of that they say that D43 don’t work with AMD. And I guess I have to agree with them after 4 months of 18-hour Days with D43s I never got them suckers to pass prime

[Silk]

I have gotten mine as high as 240 but I think in my case it is limited by the CPU not the RAM. I have mine set on CPC enabled-2.5-4-7-4-7-14-5-3-2-5-3120-5. This is the initial recommended settings by RGone. Hope this helps.

[inspector-71]

thanks.

I am getting new memory very shortly but I just wanted to get to the bottom of this first.

 

Will give the above a go. Also read 2.5, 5, 9, 5 at 2.7v works for some.

 

Will post the results when I get home.

[inspector-71]

no joy. Doesn't run memtest or boot.

I guess I'll need to stick to a 166 divider at 250 fsb until I get new memory.

[smolt]

When i Had my Hynix D43s I could only run In divider 150 and 166 no other divider would work