noxman Posted November 13, 2005 Posted November 13, 2005 please look at the attached screenshot, especially at the Speedfan Voltages for -12V and -5V: Is this normal? btw, Speedfan tells me that my oced processor (Venice at 2500Mhz, ~1,5V) is only around 38°C when testing with prime95... Is this temperature which speedfan tells me correct? btw2, in the background, you can see Prime95 (I halted the execution after 18h). Can I say that this system is stable? Or do I need running Prime95 for about 24h? btw3: I raised the Voltages for the LDT and Chipset, each 0,10V up. Does that do any harm to my Motherboard? Thanks for answers! Share this post Link to post Share on other sites More sharing options...
supershanks Posted November 13, 2005 Posted November 13, 2005 Btw - 38C seems low. -12V and -5V: Is this normal? no wrong readings I like speedfan used it a lot on my MSI Neo Plat 754 but mbm seems better on the dfi see Other - NF4-NF3-NF2 MBM 5 Setting it cured the faulty 12v reading i was having. btw2 - can only see speedfan but 18h should be fine. btw3 - thats fine will do no harm. I've tried doing the same found in fact that raising the LDT did very little so now have it at stock. luck Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now