Jump to content


Photo
- - - - -

Delidding tool i7 8086


  • Please log in to reply
20 replies to this topic

#1 dling

dling

    BEER

  • Members
  • PipPipPipPipPip
  • 3177 posts
  • Gender:Male
  • Location:Buchanan,GA.

Posted 30 August 2018 - 02:36 AM

Have any of you guys used the cheap delidding tools from ebay? Thaey sure are a lot less expensive. I see theres not a reliddend with them also. How important is that?

Case:Cooler Master Sniper / Motherboard : ASUS ROG Maximus X hero (wi-fi)/ CPU: Intel Core i7 8086K / CPU HS:Corsair H100i V2
VGA: MSI 1080 TI  OC Armor with Arctic Accelero Xtreme 3 Cooler / Memory: Corsair vengeance LPX  16GB DDR4 3600 / SSD's:Samsung  960 evo M.2 500 gig  for OS + Samsung EVO 840 250g +WD Blue 500g
PSU: CoolMax 1200W / Monitor: Acer X34 @ 100 hz/ KB: CM Storm Trigger Z / Mouse: Razor Lachesis / OS: Windows 10 Home premium 64


#2 Braegnok

Braegnok

    Nimrod

  • Folding Member
  • 1458 posts
  • Gender:Male
  • Location:Colorado USA

Posted 30 August 2018 - 06:53 AM

The Rockit 88 delid & relid kit only costs $40,.. and it's not going to damage your chip. 

 

126777_2ackm8.jpg


Edited by Braegnok, 09 September 2018 - 04:00 AM.

Intel Core i7-8700K

Asus Maximus X Apex

G.SKILL 16GB 4400MHz

Asus GTX 1080 Ti FE 

SeaSonic SSR-850TR

Corsair Hydro H115i

 

 

 

 


#3 dling

dling

    BEER

  • Members
  • PipPipPipPipPip
  • 3177 posts
  • Gender:Male
  • Location:Buchanan,GA.

Posted 30 August 2018 - 07:22 AM

Thats what I was worried about. I was think that a 3d printed delidding tool may not be the best idea. I also agree, a dead cpu is a cool cpu. Thanks.

Case:Cooler Master Sniper / Motherboard : ASUS ROG Maximus X hero (wi-fi)/ CPU: Intel Core i7 8086K / CPU HS:Corsair H100i V2
VGA: MSI 1080 TI  OC Armor with Arctic Accelero Xtreme 3 Cooler / Memory: Corsair vengeance LPX  16GB DDR4 3600 / SSD's:Samsung  960 evo M.2 500 gig  for OS + Samsung EVO 840 250g +WD Blue 500g
PSU: CoolMax 1200W / Monitor: Acer X34 @ 100 hz/ KB: CM Storm Trigger Z / Mouse: Razor Lachesis / OS: Windows 10 Home premium 64


#4 Braegnok

Braegnok

    Nimrod

  • Folding Member
  • 1458 posts
  • Gender:Male
  • Location:Colorado USA

Posted 30 August 2018 - 07:57 AM

Since I bought the Rockit tools 1151 & 2066 socket kits,.. I offered delid service at my shop for $50 and have done a few dozen chips now,.. most folks buying new custom build rig add the delid service. 


Intel Core i7-8700K

Asus Maximus X Apex

G.SKILL 16GB 4400MHz

Asus GTX 1080 Ti FE 

SeaSonic SSR-850TR

Corsair Hydro H115i

 

 

 

 


#5 dling

dling

    BEER

  • Members
  • PipPipPipPipPip
  • 3177 posts
  • Gender:Male
  • Location:Buchanan,GA.

Posted 30 August 2018 - 08:15 AM

What do you think about using super glue gel on the corners of the lid to reattach it to the processor ?
BTW took ur advice and ordered the proper tool along with the liquid metal.

Edited by dling, 30 August 2018 - 08:25 AM.

Case:Cooler Master Sniper / Motherboard : ASUS ROG Maximus X hero (wi-fi)/ CPU: Intel Core i7 8086K / CPU HS:Corsair H100i V2
VGA: MSI 1080 TI  OC Armor with Arctic Accelero Xtreme 3 Cooler / Memory: Corsair vengeance LPX  16GB DDR4 3600 / SSD's:Samsung  960 evo M.2 500 gig  for OS + Samsung EVO 840 250g +WD Blue 500g
PSU: CoolMax 1200W / Monitor: Acer X34 @ 100 hz/ KB: CM Storm Trigger Z / Mouse: Razor Lachesis / OS: Windows 10 Home premium 64


#6 Braegnok

Braegnok

    Nimrod

  • Folding Member
  • 1458 posts
  • Gender:Male
  • Location:Colorado USA

Posted 30 August 2018 - 09:14 AM

Just a "small" drop of the Gel Super Glue in each corner is the way to go,.. it's dry and ready to install in 2-hours. 

 

First chip I used the liquid super glue and it runs all over everything if your not vary careful,.. use the gel. And also do a test drop on a paper towel before hand,..

 

also do a test drop of the LM before pushing plunger over die, sometimes the syringe plunger won't push, and when you push a little harder it will shoot a huge blast of LM all over everything.  :lol:


Edited by Braegnok, 10 September 2018 - 06:43 PM.

Intel Core i7-8700K

Asus Maximus X Apex

G.SKILL 16GB 4400MHz

Asus GTX 1080 Ti FE 

SeaSonic SSR-850TR

Corsair Hydro H115i

 

 

 

 


#7 dling

dling

    BEER

  • Members
  • PipPipPipPipPip
  • 3177 posts
  • Gender:Male
  • Location:Buchanan,GA.

Posted 30 August 2018 - 10:00 AM

Thanks for all the help. Getting m/b and cpu
Tomorrow from Microcenter.

Case:Cooler Master Sniper / Motherboard : ASUS ROG Maximus X hero (wi-fi)/ CPU: Intel Core i7 8086K / CPU HS:Corsair H100i V2
VGA: MSI 1080 TI  OC Armor with Arctic Accelero Xtreme 3 Cooler / Memory: Corsair vengeance LPX  16GB DDR4 3600 / SSD's:Samsung  960 evo M.2 500 gig  for OS + Samsung EVO 840 250g +WD Blue 500g
PSU: CoolMax 1200W / Monitor: Acer X34 @ 100 hz/ KB: CM Storm Trigger Z / Mouse: Razor Lachesis / OS: Windows 10 Home premium 64


#8 Braegnok

Braegnok

    Nimrod

  • Folding Member
  • 1458 posts
  • Gender:Male
  • Location:Colorado USA

Posted 30 August 2018 - 01:17 PM

Glad to help ding. Have fun tomorrow, an get your new hardware together, running @ default settings 100% stable,.. before pulling chip and doing delid.  :cheers:


Intel Core i7-8700K

Asus Maximus X Apex

G.SKILL 16GB 4400MHz

Asus GTX 1080 Ti FE 

SeaSonic SSR-850TR

Corsair Hydro H115i

 

 

 

 


#9 dling

dling

    BEER

  • Members
  • PipPipPipPipPip
  • 3177 posts
  • Gender:Male
  • Location:Buchanan,GA.

Posted 30 August 2018 - 03:59 PM

Thanks. I wasn't planning on doing that but it makes sense. Hoping to put it togethet this weekend then. I will post new sig when finished.

Case:Cooler Master Sniper / Motherboard : ASUS ROG Maximus X hero (wi-fi)/ CPU: Intel Core i7 8086K / CPU HS:Corsair H100i V2
VGA: MSI 1080 TI  OC Armor with Arctic Accelero Xtreme 3 Cooler / Memory: Corsair vengeance LPX  16GB DDR4 3600 / SSD's:Samsung  960 evo M.2 500 gig  for OS + Samsung EVO 840 250g +WD Blue 500g
PSU: CoolMax 1200W / Monitor: Acer X34 @ 100 hz/ KB: CM Storm Trigger Z / Mouse: Razor Lachesis / OS: Windows 10 Home premium 64


#10 dling

dling

    BEER

  • Members
  • PipPipPipPipPip
  • 3177 posts
  • Gender:Male
  • Location:Buchanan,GA.

Posted 07 September 2018 - 02:18 PM

So here the pics of my deligging from today. It started out so well then Im not sure but I may have screwed it up.

I realized that I did not have the relidding cover all the way pushed on. It tool a bit of pressure, more then I expected.

But of corse I had already added the glue. So I remover the lid for a second time and then the liquid metal had ran over the side of the cpu.

I used tape to clean it up . But the super glue made a bit of a mess and may have caused a bit of a buildup .anyways it all together and running.

I got in such to do this that I had for gotten to do some before temp test so Idont what it was reading .I only have after temps.

Attached Thumbnails

  • m_20180907_083058.jpg
  • m_20180907_084309.jpg
  • m_20180907_085412.jpg
  • m_20180907_091013.jpg
  • m_20180907_094120.jpg
  • m_20180907_095533.jpg
  • m_20180907_100141.jpg

Case:Cooler Master Sniper / Motherboard : ASUS ROG Maximus X hero (wi-fi)/ CPU: Intel Core i7 8086K / CPU HS:Corsair H100i V2
VGA: MSI 1080 TI  OC Armor with Arctic Accelero Xtreme 3 Cooler / Memory: Corsair vengeance LPX  16GB DDR4 3600 / SSD's:Samsung  960 evo M.2 500 gig  for OS + Samsung EVO 840 250g +WD Blue 500g
PSU: CoolMax 1200W / Monitor: Acer X34 @ 100 hz/ KB: CM Storm Trigger Z / Mouse: Razor Lachesis / OS: Windows 10 Home premium 64


#11 dling

dling

    BEER

  • Members
  • PipPipPipPipPip
  • 3177 posts
  • Gender:Male
  • Location:Buchanan,GA.

Posted 07 September 2018 - 02:20 PM

It should have been a lot easier then I made . The hard way seems to be my way.


Edited by dling, 07 September 2018 - 02:20 PM.

Case:Cooler Master Sniper / Motherboard : ASUS ROG Maximus X hero (wi-fi)/ CPU: Intel Core i7 8086K / CPU HS:Corsair H100i V2
VGA: MSI 1080 TI  OC Armor with Arctic Accelero Xtreme 3 Cooler / Memory: Corsair vengeance LPX  16GB DDR4 3600 / SSD's:Samsung  960 evo M.2 500 gig  for OS + Samsung EVO 840 250g +WD Blue 500g
PSU: CoolMax 1200W / Monitor: Acer X34 @ 100 hz/ KB: CM Storm Trigger Z / Mouse: Razor Lachesis / OS: Windows 10 Home premium 64


#12 blacksails23

blacksails23

    Member

  • Members
  • PipPip
  • 74 posts
  • Gender:Male
  • Location:Hawaii

Posted 07 September 2018 - 07:39 PM

How'd it work out for you?