pejantan

guys, i want to try this software, but i think the link is down..... help me to find the right link please:)

i'm using local brand, named v-gen with samsung uccc chip week 25 could reach 290 with 2.5v super pi 1m pass, and 285 past all test (super pi 32m, prime, 3dmark03 and

thanx for ur support AG.... cos i've that problem too....

guys.....lot of question bout this board, but why the DFI engineer never give a response in here? is it possible that they don't know dfistreet.com???? FYI....In Indonesia, A**t's main dealer have someone to watch the OC'er community site, so if the a**t user have a problem they can ask him and give us the troubleshoot quickly

still waiting for bios update !!!!!!!!

yup.....in Indonesia DFI NF4x Infinity is the best seller for NF4x mobo, but with a lot of bug.....my friend in Jogjakarta suggest me to use albatron or NV8 from abit... @redbeaver: is it correct that they have been working to build a bios to fix the bug?? please post the email from DFT TS so that we know that they pay attention for our problem

agree with redbeaver, in smarguardian it doesn't reporting the correct temp...... i know cos i'm using thermodig right now

are u sure???? that was impossible.....as far as i know all dfi nf4x infinity user have had this problem....

acccording to my opinion....all the DFI boards are built for overclock...especially for the infinity and lanparty series...... an then same as Lopio, i still don't believe thet dfi still sell this board.....and unfortunately in Indonesia this board is always sold out over the other board...for nf4x of course, but now i'm sure that it will be change after a friend that trying the albatron nf4x could reach FSB 390 and abit nv8 that could reach 407 (it mean more than 100% overclocked using sempron64 2500+ palermo)....i've planning to sell dfi nf4x infinity and buy abit or alby....poor dfi

the biggest problem in NF4X infinity is in the bios....my twinmos BH5 PC3500 cannot work in IT command even in 3.2v ....i don't understand why DFI didn't pay attention for a lot of problem in NF4x infinity....temp sensor, voltage sensor, stability and now compatibility....bad news!!!!

the latest SG???? not to good at all.....i'm using everest ultimate edition right now and the CPU temp show the same temp with my thermodig..... @redbeaver: i've sent an email to dfits for 2 or 3 times....since december but they don't pay attention for that...

from the 1st time i sent them an email, i brought some issue...temperature sensor, voltage sensor, stability and software monitoring.......i told them that i've tried using speedfan, everest,MBM5, and ITE, but all of the software give me different result.....the beta version that they give to me didn't fixed the isuue and then..... i have a conclution that the problem is in the bios....it proved after i flash using newest beta bios, now my system is more stable...that why i ask the a question below: 1. it doesn't fix the cpu temp problem.......and 2.last night i found some bug with my twinmos BH5 2*256....it cannot work with 1T and there is error if i use 2 memory... 3. is there any major improvement in DFI NF4X PCB Rev B.......what 's the different between PCB Rev A maybe because of my english, so they cannot take the point

thanx Tmod.....i've sent them an email and i don't get the answer...(see below) Dear Customer, Thank you for taking time submit us the query again! For our NVIDIA based Infinity series provide two applications for monitor system health: SmartGuardian & nTune Monitor. SmartGuardian primarily monitor the board IO controller for temperature and voltage of system sensor. nTune Monitor monitors the major part system information including the CPU temperature, FYR. Best, ------------------------------------------------------------- DFI Technical Support Team 100 Huan-Ho St., Hsi-Chih City, Taipei, Taiwan, R. O. C. http://www.dfi.com Tel: +886-2-2694-2986 Fax: +886-2-2694-3226 BBS: +886-2-2694-3217 E-mail: [email protected] ------------------------------------------------------------- Issue NBR: From: Sismadi Siss [mailto:[email protected]] Sent: Tuesday, December 06, 2005 3:43 PMTo: Tech Support [DFITS]Subject: Re: DFI NF4X-Infinity - 0543009-655 ur new beta bios is work for my system, more stable, good job guys...http://us.dfi.com.tw/Upload/BIOS/CK8XDVGA.zip but unfortunately.... 1. it doesn't fix the cpu temp problem.......and 2.last night i found some bug with my twinmos BH5 2*256....it cannot work with 1T and there is error if i use 2 memory... 3. is there any major improvement in DFI NF4X PCB Rev B.......what 's the different between PCB Rev A sorry 4 my bad english.....it just a little support for DFI so i hope the bug will be fixed soonthanx On 10/18/05, Sismadi Siss < [email protected]> wrote: thanx for the support.....i've tried to extract the file.....but ihaven't see the CPU temperatur (most important 4 me)....there's onlysystem 1 and system 2......from this 2 sensor, which is reflecting theCPU temp??? is there any new beta bios or modded bios for this board??? thanx ---------- Forwarded message ----------From: Tech Support [DFITS] Date: Oct 14, 2005 5:29 PMSubject: RE: DFI NF4X-Infinity - 0543009-655 To: [email protected] Dear Customer, Thank you for submitting us the query. Please download our BETAapplication for your trial, and also feedback us the hardware monitor utility if it's work properly. Thanks in advance. http://www.dfi.com.tw/Upload/Driver/ITE_SG_050429.zip Best, ------------------------------------------------------------- DFI Technical Support Team 100 Huan-Ho St., Hsi-Chih City, Taipei, Taiwan, R. O. C. http://www.dfi.com Tel: +886-2-2694-2986 Fax: +886-2-2694-3226 BBS: +886-2-2694-3217 E-mail: [email protected]

1. some bug with my twinmosPC3500 BH5 2*256....it cannot work with 1T and there is error if i use 2 memory...besides, if i use 2.5-4-4-9 to reach high HTT my computer won't boot anymore 2. CPU temperature is up and down very quick 3. something wrong with voltage sensor 4. if i set HTT between 353-357, in CPUZ, Everest, CPUID always show HTT 358....so there's missing HTT between 353-357 5. I connot monitor my cpu temp, cos in ITE smart guardian, speedfan, n everest i cannot choose which is the cpu temp... sorry 4 my bad english..... thanx 4 ur help

why no one seems to care bout DFI NF4X Infinity.......i think it is a value mobo with high performance especially fo OC....i could reach 2470 from def 1400 with my sempron 2500+ and DFI NF4x infinity.....unfortunately there's some bug in the bios.....Is there any modded bios for me????