dfx

Dude think about it Do u seriously need that extra 100Mhz or so? The extra 100Mhz u earn wouldnt shave off your superpi 1mb by 1s non an increase of 10fps

Interest Check http://www.vrforums.com/showthread.php?t=39590&page=2 Interesting thread http://www.xtremesystems.org/forums/showth...15&page=1&pp=25

Follow this 2 threads And you will noticed that qwerty57 suffer from coldbug from all the opterons he got http://www.vrforums.com/showthread.php?t=41265 http://www.vrforums.com/showthread.php?t=40898

Oh ok.. Here's mine @ idle Full load @ -9c ~ -12c

Doubt under load @ -23c -20c n' below you wouldnt had been able to boot up or run stable due to cold bug Unless Vcore @ around 1.8v and above

Dude if u had played an Opt u would had notice it run hotter and its mem controller arent that great compared to it peers They cant tweak certain tight timing compared to a (San Deigo, Venice, Clawhammer etc) Anyway Server chip arent trained for desktop, they need not tight timing They need stability (loose timing) Anyway that my personally experience

(CABYE 0540 FPMW) Takenote: Ram Divider @ 7/10 Able to do basic stuffs but not Prime

I dont think so.. I had my X2 4400+ @ 2.65GHz (Small FFT x 2) for 12hrs running perfectly And also had my Twinmos BH5 2 x 512MB @ 265Mhz (2225) and Corsair UCCC 2 x 1GB @ 270MHz (3448) running Memtest #5 for 12hrs error free But up to date i still cant even run Blend or Large FTT even @ 2.6GHz 1:1 Can define where could had went wrong :confused:

My error guys Mine is a CABYE 0540 FPMW Not FPBW

Takenote: Ram Divider @ 7/10 Able to do basic stuffs but not Prime

I tried playing around with PI first before i actually Prime it finding its sweet Vcore

Here's mine 146 CABYE 0540FPMW on AIR

A noob question.. Can Opteron dual core support socket 939 :confused:

OPS :eek: Noted :nod:

Here u go :nod: