BB_One Posted May 3, 2005 Posted May 3, 2005 I just came across this in trying to help someone and frankly do not have an answer to it, maybe AG or Rgone could query engineers or have an explanation for this one. Look at this table and notice the redundant entry for value 1032, this is not a typo in the chart as I originally suspected, but in fact also in the bios of nf3 or nf4. Is this a typo in the bios hence one setting for tref is gone missing because of it? Chart courtesy of Jess1313 at Overclockers forum 1552= 100mhz(?.?us) 2064= 133mhz(?.?us) 2592= 166mhz(?.?us) 3120= 200mhz(?.?us --------------------- 3632= 100mhz(?.?us) 4128= 133mhz(?.?us) 4672= 166mhz(?.?us) 0064= 200mhz(?.?us) --------------------- 0776= 100mhz(?.?us) 1032= 133mhz(?.?us)<---? 1296= 166mhz(?.?us) 1560= 200mhz(?.?us) --------------------- 1816= 100mhz(?.?us) 2064= 133mhz(?.?us) 2336= 166mhz(?.?us) 0032= 200mhz(?.?us) --------------------- 0388= 100mhz(15.6us) 0516= 133mhz(15.6us) 0648= 166mhz(15.6us) 0780= 200mhz(15.6us) --------------------- 0908= 100mhz(7.8us) 1032= 133mhz(7.8us)<------? 1168= 166mhz(7.8us) 0016= 200mhz(7.8us) --------------------- 1536= 100mhz(3.9us) 2048= 133mhz(3.9us) 2560= 166mhz(3.9us) 3072= 200mhz(3.9us) --------------------- 3684= 100mhz(1.95us) 4196= 133mhz(1.95us) 4708= 166mhz(1.95us) 0128= 200mhz(1.95us) While we are on this subject, does anyone have a clue about the values (entries) for the µs identified with ??. Thanks for your help. Share this post Link to post Share on other sites More sharing options...
Sharp Posted May 3, 2005 Posted May 3, 2005 Hello, What do you think about this? http://dfi-street.com/forum/showthread.php...&highlight=TREF Share this post Link to post Share on other sites More sharing options...
Vista Posted May 3, 2005 Posted May 3, 2005 Also, check out this thread: http://www.xtremesystems.org/forums/showthread.php?t=57309 It looks like the two settings are not quite the same. I think one bank is a slightly relaxed version of the other (same MHz, different microseconds). Share this post Link to post Share on other sites More sharing options...
BB_One Posted May 3, 2005 Posted May 3, 2005 Nice info and in some instances refers to the same document...still puzzling question is how come twice the same value (1032) in the bios, and for different latency in theory? Not sure my math skills are what they should be, for from Rgone's formula I am kind of puzzled as to how to get the missing values? Vista if you pay close attention to my post and the table originator and the link you provided you will off course realize that those are the same charts and from the same originator...hence question is still valid and not answered. Share this post Link to post Share on other sites More sharing options...
BB_One Posted May 3, 2005 Posted May 3, 2005 It looks like the two settings are not quite the same. I think one bank is a slightly relaxed version of the other (same MHz, different microseconds). Cannot be, for both have the same entry value in bios ---> 1032...hence one tref setting in bios missing... Share this post Link to post Share on other sites More sharing options...
Vista Posted May 3, 2005 Posted May 3, 2005 They might have the same label, but they are different bit settings doing different things. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now