T3mpest Posted June 21, 2008 Posted June 21, 2008 Hey, Recently installed a WC setup and wondering i did something wrong. CPU temps read by HW monitor are core0 and core1 idle at 41, CPUTIN is at 29 idle. My WC setup is a swiftech quiet power 2x120 RAD, liang d-5 pump on setting 2, Fuzion v2 CPU block Main question is are these temps high. 2nd question is should i turn up the pump to help lower temps and how would that affect the life of the pump. Another question is i currently use 2 scythe 110 CFM fans on the rad, would changing fans help lower temps? Share this post Link to post Share on other sites More sharing options...
shadowk Posted June 21, 2008 Posted June 21, 2008 this is good temps the cores allways be higher then the CPU temp if ur CPU temp is 29 its perfect do check at full load that will give u better idea for whats ur teamp really r Share this post Link to post Share on other sites More sharing options...
T3mpest Posted June 21, 2008 Posted June 21, 2008 this is good tempsthe cores allways be higher then the CPU temp if ur CPU temp is 29 its perfect do check at full load that will give u better idea for whats ur teamp really r yeah sorry, meant to post that, its 45C load on core, CPUTIN is 35 Share this post Link to post Share on other sites More sharing options...
hardnrg Posted June 21, 2008 Posted June 21, 2008 I've had my D5s at 5 since I got them... as long as you don't get a problem with noise (mine are near silent anyway) then there's no problem running them at full speed Share this post Link to post Share on other sites More sharing options...
shadowk Posted June 21, 2008 Posted June 21, 2008 it perfect temps Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now