rud3bwoy Posted May 20, 2008 Posted May 20, 2008 So my asus rampage has a option where i can choose other pc processors and over clock it,so i picked the Q9650 WHICH is clocked at 3.0 so now my q9450 is at 3.0 but under vista basic info it still shows clocked at 2.6?is that ok? now everest reports this CPU Clock 2999.9 MHz (original: 2667 MHz, overclock: 12%) CPU FSB 375.0 MHz (original: 333 MHz, overclock: 13%) on cpu z it shows it jumping from 2.999.9 to 3.0 ghz,should i be concerned by these issues? Share this post Link to post Share on other sites More sharing options...
BlearyCzech Posted May 20, 2008 Posted May 20, 2008 I wouldn't be concerned at all. Vista has a habit of showing the stock speeds when overclocked. I've heard there is some way to remedy this, but can't remember right now. Share this post Link to post Share on other sites More sharing options...
rud3bwoy Posted May 20, 2008 Posted May 20, 2008 Ok because bios shows it start up shows it cpu z and everest shows it vista don't tho Share this post Link to post Share on other sites More sharing options...
rud3bwoy Posted May 20, 2008 Posted May 20, 2008 Anyone can help me fix this please let me know thanks. Share this post Link to post Share on other sites More sharing options...
rud3bwoy Posted May 20, 2008 Posted May 20, 2008 Updated FIX THE ISSUE DUMB ME DID NOT TURN OF SPEED STEP OR W.E IT WAS IN BIOS Share this post Link to post Share on other sites More sharing options...
CanadaGUY Posted May 20, 2008 Posted May 20, 2008 Speed step, will just drop your multiplier to 6x while your computer is idle to save energy. Just rely on CPU-Z for what your CPU is running at (it will move up and down a bit like 2.9999 -> 3.00ghz) Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now