Guest Raven65 Posted October 23, 2005 Posted October 23, 2005 Ok , Can't get my son's computer to load windows. Keep getting the error. IRQL not less than or equal to Zero. mishkin ram. dc 256x2, 3700+ sandy have ram voltage set now to 2.9 started at 2.7. ram is rated @ 2.6 to 2.8v HAve all ram settings to auto for the time being. have ram in the 2 orange slots. I have a DFI also and can't get it to work even tweaking the bios. can someone help. Ram is good. it was working fine in his other setup. Share this post Link to post Share on other sites More sharing options...
swifty11212 Posted October 23, 2005 Posted October 23, 2005 what kind of ram is it, keep in mind not all motherboards will work with ram that works in other rigs, you might need to get bh5 type ram. Share this post Link to post Share on other sites More sharing options...
ccokeman Posted October 23, 2005 Posted October 23, 2005 What bios are you running ? You want to move most of the settings from auto. In order from the top of the memory setting page in bios 200 1:1 enable 2.5 3 7 3 7 14 3 3 2 3 3120 auto enable decrease 128 7 2 8 5 256 disable 16x 7x disable 4 bursts fsb frequency to 200 Set Ldt multi to 5 set fsb multiplier to 11 This would be a good start. you can set your voltages manually or leave them on auto to start. Share this post Link to post Share on other sites More sharing options...
Guest Raven65 Posted October 23, 2005 Posted October 23, 2005 ok Cool I'll try that. Thanks, I'll keep you posted. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now