Sheepy Posted May 6, 2005 Posted May 6, 2005 (edited) hi, Got a little problem still with stabilty. Ive clocked my comp to 207 X 11.0 = 2283MHz. My ram timing are 2.5-2-2-6. An i have the vcore is set at 10% which is max i can set at. An the comp runes fine. When i get to 210 X 11.0 the comp is unstable when i run OCT. Any ideas as to wer im going wrong here. I have bought a new fan for cpu an got 3 chasis fans. so temp is ok now. Thanks Sheepy Sorry about the two posts, my web browser crashed Edited May 6, 2005 by Sheepy Share this post Link to post Share on other sites More sharing options...
Puck Posted May 6, 2005 Posted May 6, 2005 hi, Got a little problem still with stabilty. Ive clocked my comp to 207 X 11.0 = 2283MHz. My ram timing are 2.5-2-2-6. An i have the vcore is set at 10% which is max i can set at. An the comp runes fine. When i get to 210 X 11.0 the comp is unstable when i run OCT. Any ideas as to wer im going wrong here. I have bought a new fan for cpu an got 3 chasis fans. so temp is ok now. Thanks Sheepy Sorry about the two posts, my web browser crashed 473794[/snapback] Try 2.5-3-3-6, or increasing the ram volts. Share this post Link to post Share on other sites More sharing options...
RadioActivated Posted May 6, 2005 Posted May 6, 2005 What kind of divider are you using ? 100,133,166 or 200 ? Share this post Link to post Share on other sites More sharing options...
Sheepy Posted May 6, 2005 Posted May 6, 2005 ive checked my bios setting an there is no option to change the middle numbers in the ram timings. i can only change the front numbers. the options i have are 2T, 2.5T, 3T I have the ram voltage set to high. Im new to this so can some one explain what a divider is. Share this post Link to post Share on other sites More sharing options...
Ender_Wiggin Posted May 6, 2005 Posted May 6, 2005 ive checked my bios setting an there is no option to change the middle numbers in the ram timings. i can only change the front numbers. the options i have are 2T, 2.5T, 3T I have the ram voltage set to high. Im new to this so can some one explain what a divider is. 473800[/snapback] Have you locked the AGP/PCI buses? Share this post Link to post Share on other sites More sharing options...
Sheepy Posted May 6, 2005 Posted May 6, 2005 (edited) thas a good question. No is the answer. At the mo its set on 32. the bios info said 32 was best number for best performance. shall i up it. an if i should wat should i up it 2?? Thanks Also is that the PCI latency timer(pci clocks) Thanks Edited May 6, 2005 by Sheepy Share this post Link to post Share on other sites More sharing options...
Ender_Wiggin Posted May 7, 2005 Posted May 7, 2005 (edited) thas a good question. No is the answer.At the mo its set on 32. the bios info said 32 was best number for best performance. shall i up it. an if i should wat should i up it 2?? Thanks Also is that the PCI latency timer(pci clocks) Thanks 473826[/snapback] I believe so, mine's at 64 (motherboard default) ive tried 32, but i wasnt sure if the stability issue i had at the time was related to it or not, so i swapped it back. Edited May 7, 2005 by Ender_Wiggin Share this post Link to post Share on other sites More sharing options...
Sheepy Posted May 7, 2005 Posted May 7, 2005 ive upped to 64 an comp is stable at 212 x 11. thx guys im gonna up sooem more now let u no how it goes Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now