Wicked_Jester Posted January 30, 2005 Posted January 30, 2005 Ok here's the deal ... I just ordered this case >>> http://www.newegg.com/app/ViewProductDesc....-162-002&depa=0 <<< And I am going to mod it for my first case ... I want it all Sinister looking so 1st I'm going to strip it down and paint the frame red ... Next I'm going to stealth my 2 ROM drives (with the housings painted red) ... I'm also thinking of stealthing my 3.5 floppy drive (Any suggestions are welcome) ... I have odreded 3 of these fans >>> http://www.newegg.com/app/viewproductdesc....-998-107&DEPA=0 <<< ... Later I hope to order the Black round IDE cables, For now I will try to make my own round cables and Sleeve my power supply wires with Black tape ... I also am going to have a friend of my airbrush an Evil Jester on the blank side of the case with ghost flames fading up from the bottom ... Also if to look close at the front or the case you will see plastic piping with air bubbles in it (I think it's air bubbles) ... At first I thouth about swithing those out for a Cathode but now I'm thinking of drilling a hole under the chrome tab at each end of the pipes and putting red LEDs so I'll have a red glow with the air bubble sparkles ... I was thinking about the fan openings but I don't want to leave them stock and I don't want to cut them out to put cheesy fan grills on (Any ideas?) ... Well what do ya'll think ? Jester Share this post Link to post Share on other sites More sharing options...
epikz Posted January 30, 2005 Posted January 30, 2005 those fan hole or whatever make the case quite loud btw, my friend has 1 and i told him to cut it out with a dremel and wasn't so loud after Share this post Link to post Share on other sites More sharing options...
airman Posted January 30, 2005 Posted January 30, 2005 sounds good...if ya need help with painting, PM meh. Share this post Link to post Share on other sites More sharing options...
Wicked_Jester Posted January 31, 2005 Posted January 31, 2005 Also ... Any ideas on how I can stealth my fan speed controller? I thought about hinging a dummy slot over the recessed controller ... Jester Share this post Link to post Share on other sites More sharing options...
airman Posted January 31, 2005 Posted January 31, 2005 Also ... Any ideas on how I can stealth my fan speed controller? I thought about hinging a dummy slot over the recessed controller ... Jester 408033[/snapback] mm that's a possibility. maybe have it flip down or something. i know you can figgure it out Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now