Guest_Jim_* Posted December 4, 2019 Posted December 4, 2019 Today EK Water Blocks announced it is releasing new EK-Vardar EVO 140 ER D-RGB fans. These 140 mm fans feature nine addressable LEDs under its motor hub and its seven fan blades are transparent, but frosted to disperse the light. The lighting is controlled by a standard 3-pin 5 V D-RGB connector, so it can work with any controller that also uses that standard. Turning to the fan specifications, these are high-static pressure fans targeting high-performance liquid cooling systems. They are PWM controlled and offer an extended range from 400 RPM up to 1600 RPM, allowing you to tune for noise and performance as you wish. If the fan curve is set to below 25-30%, depending on the motherboard, the fan's Start-Stop function will trigger the motor and electronics to turn off, so the fan will go completely silent until it is needed again. EK-Vardar EVO 140ER D-RGB fans are available for purchase already at EK's webshop and via its reseller network with a price of $28.99. Source: EK Water BlocksBack to original news post Share this post Link to post Share on other sites More sharing options...
Recommended Posts