RazerInc94 Posted January 31, 2013 Posted January 31, 2013 The Extreme IV v2I Am currently working on a school project where i have build an own computer case from scratch and the idea is to fill it with "extreme hardware".I know that some of my hardware is not extreme but it works for me. I will upgrade the gpus someday when i can afford it.Hardware:ASUS Rampage IV Extreme x79Intel i7 3930K16gb Corsair VengeanceHD 6870 CrossfireCorsair AX860Corsair Force 3 120GB5x Scythe Slip Stream (temporary)Cooler Master Hyper 212 Evo (temporary)Water Cooling:EK-Supremacy - Acetal + NickelEK-Reservoir Combo DCP 4.0EK-CoolStream RAD XT (360)EK-CoolStream RAD XT (240)2x EK-FC6870 - Acetal+EN Nickel2x EK-FC6870 BackplateEK-FC Bridge TRIPLEEK-FC Link BLANKNow lets see some pictures!Special thanks to EK waterblocks who sponsor my project with water cooling, couldn't do it without you nice fellows at EK!CAD model of how the chassis will look like without the side panels and the motherboard plate.I use this machine to bend the plates.Making duplicates of everything in case something goes wrong.The rear plate will be screwed in to the motherboard plate. You can also see the front.I choose to only have one 5.25 "for a fan controller because i dont need an optical drive.The "basket" that will hold the fan controller in place.The case is starting to take shape.A picture if the welder "S Share this post Link to post Share on other sites More sharing options...
RazerInc94 Posted January 31, 2013 Posted January 31, 2013 (edited) 5.25 " Cover.Another picture of the crazy S Edited January 31, 2013 by RazerInc94 Share this post Link to post Share on other sites More sharing options...
RazerInc94 Posted January 31, 2013 Posted January 31, 2013 (edited) It has been a while since I updated but have had other things for me so haven't had the time to upload the pictures. As you can see, I mounted some parts out of the water cooling in the computer. I had to remove the plates that lock out the power supply as the res was to high.Took the fan control from the other project, I will buy a new one if i need to some day.I also changed fans to 5 Phobya Nano-G 12.Cpu block in place! Really easy to install on socket 2011.Pump o res combo assembled.I put a fill port on the bottom so I can drain the whole system easily.As this was my first time to install watercooling I put a lot of paper in the system while I was testing the watercooling. The gpu blocks didn't fit but i am working on a solution so stay tuned! Edited February 17, 2013 by RazerInc94 Share this post Link to post Share on other sites More sharing options...
RazerInc94 Posted January 31, 2013 Posted January 31, 2013 Reserved Post #2 Share this post Link to post Share on other sites More sharing options...
EuroFight Posted January 31, 2013 Posted January 31, 2013 Looking nice so far Wish I had school projects like that 1 Share this post Link to post Share on other sites More sharing options...
paulktreg Posted January 31, 2013 Posted January 31, 2013 School project! The best I ever did was a small 9V power supply! Share this post Link to post Share on other sites More sharing options...
Stonerboy779 Posted January 31, 2013 Posted January 31, 2013 I made a basic signal generator and variable power supply. I could only have hoped to do something like this. Good work Share this post Link to post Share on other sites More sharing options...
RazerInc94 Posted February 1, 2013 Posted February 1, 2013 Looking nice so far Wish I had school projects like that School project! The best I ever did was a small 9V power supply! I made a basic signal generator and variable power supply. I could only have hoped to do something like this. Good work Thanks guys! Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now