mastercraft2006 Posted June 27, 2011 Posted June 27, 2011 Can i get this to computer to run cooler. I have a MSi bang Bus Xpower motherboard: Haf X case intel I-950 Corsair H70 to cool cpu. 1 gtx 480 gpu corsair power supply 1000 watts 12gb corsair dominator 2133ghz with fans and Corsair Airflow pro. 2 corsair force 60Gb ssd in raid 0 1 corsair force 120 ssd 1 tb harddrive I overclocked Cpu to 3.682 stock 3.05 memory stable at 1600mhz system temp is 100 degrees cpu 44 c ambient temp is 83 F in room . can i over clock this faster and still keep my temps low and stable. I used antec formula 5 silver thermal compound on cpu and h70 heatsink. small amount on both running a bussiness card to make it thinner.. Share this post Link to post Share on other sites More sharing options...
imm0rt41 Posted June 28, 2011 Posted June 28, 2011 What do your load temps get up to? As long as the chip doesn't get too hot I don't see what would be holding you back from reaching 4.0GHz, but I don't know much about Intel chips since socket 478 lol Share this post Link to post Share on other sites More sharing options...
mastercraft2006 Posted June 28, 2011 Posted June 28, 2011 (edited) [ Edited June 28, 2011 by mastercraft2006 Share this post Link to post Share on other sites More sharing options...
wevsspot Posted June 29, 2011 Posted June 29, 2011 First off........ welcome to OCC Mastercraft Did you pick your user name because you like Mastercraft boats? I agree with imm0rt, As long as temps stay in check you should be easily able to hit 4.0Ghz. I'm running the same setup and I run at 4.02Ghz 24/7 For benchmarks I run at 4.40Ghz with sane voltages without problems. Your real challenge is accepting that you probably won't be able to run 4.0Ghz with 12Gb of memory running at DDR3 2000 speeds. If you're interested, reset your BIOS to Optimized Defaults and give these settings a try; Bclk - 175 CPU Multiplier - 23 CPU Voltage - 1.318v QPI Voltage - 1.310v Intel Thermal Protection - Off Intel Turbo Mode - Off RAM - Linked Memory Timings 8-8-8-24 1T @ 1750Mhz DRAM Voltage - 1.64v CPU Voltage Droop - Low QPI Voltage Droop - Low Spread Spectrum - disabled Anything I didn't specifically mention leave at Auto settings Using BIOS revision 1.6 released on 3/29/2011 Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now