jdm_freek Posted March 24, 2011 Posted March 24, 2011 (edited) ok so here is my story. I've been running my system in sig @ 4.0ghz by setting it to 20x200 set to xmp to 1600mghz and voltage to which I've heard is not smart. temp were 47c at idle 72c at load so i started searching and then i set voltage to 1.275 and 200x19 and idle is 47c load 65c my question is any advice as to getting to 4.2 safe Edited March 24, 2011 by jdm_freek Share this post Link to post Share on other sites More sharing options...
Black64 Posted March 24, 2011 Posted March 24, 2011 Seems a little hot. maybe do a push and pull fan setup on your water-cooling setup. I think you could just try the raise the CPU multiplier a little more. that may get you to 4.2 Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now