bishop245 Posted January 19, 2011 Posted January 19, 2011 ok if you cant make it past 3.45 stable and i had it at 3.6 stable then maybe i should keep working on it lol instead of you Share this post Link to post Share on other sites More sharing options...
Boinker Posted January 19, 2011 Posted January 19, 2011 (edited) Hey I'm playing nice. I haven't performed said action in my sig..... YET Oh BTW Bishop, Define stable.... Edited January 20, 2011 by boinker Im a smarty pants Share this post Link to post Share on other sites More sharing options...
Boinker Posted January 21, 2011 Posted January 21, 2011 (edited) Ok, Its been a long night and I will now post my final OC data. This was a tough CPU to overclock. The limit though has been officially pushed as I am WAY over any factory recommended voltage and going much further threatens the chips life indefinitely. I wanted to make it to 4ghz badly. But I thought to myself... Whats 100 mhz really going to do. This is one hour occt stable and Firmly belive it can make the 24 hour runs and the Infamous OCCT linpak Hour test. But hey, its oc'ed. And it runs A heck of a lot better. And the Grim reaper in the Background is more then fitting. CPU final clock speed 3.9015Ghz Cpu Multiplier: 9x CPU core voltage Bios: 1.650v CPU core voltage CPUID: 1.600v CPU FSB: 1.550v nForce SPP (NB): 1.550v NF200 Chip: 1.450v FSB memory link: Unlinked FSB memory Ratio: auto FSB (QDR): 1734.0 Memory clock 1067.0 Memory timings: 5-5-5-12 Memory command rate: 2T Memory voltage: 2.100v CPU LDT frequency: 4x GTL voltage reference 0-3 lanes: all set to 0.00mv I thought about Putting this up on the Socket 775 competition thread. I hate to say it bishop but that is your job as it is your rig. Claim your place on the leader board. And here are the OCCT Core Data prints in case anyone doubts. Edited January 21, 2011 by boinker Forgot some information Share this post Link to post Share on other sites More sharing options...
bishop245 Posted January 22, 2011 Posted January 22, 2011 sweet you got it stable at 3.9 when i could only get it stable at 3.6 ish once i quit hualing loads in misery i will get it back from ya or you can take it back to the office sometime this week Share this post Link to post Share on other sites More sharing options...
Boinker Posted January 23, 2011 Posted January 23, 2011 Will cuss and discuss that later max. I'm just wondering... Are you going to leave it where I put it? Share this post Link to post Share on other sites More sharing options...
bishop245 Posted January 23, 2011 Posted January 23, 2011 lol maybe but I may tinker and try to squeeze 4.0 out of it hehe if I smoke it it's my fault not yours so no worries unless I kill your ram then big worries. I will be trying to oc the vid card alot if you haven't done so yet though also. Share this post Link to post Share on other sites More sharing options...
Boinker Posted January 23, 2011 Posted January 23, 2011 You have my permission to smoke it. DDR2 is not that expensive. And at some places you can still get mushkin redline 1000 so I don't care. Worst case scenario I can get El cheapo 1066 and put my Boinkfactor coolers on it. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now