Majikdog Posted May 14, 2010 Posted May 14, 2010 I have already put together the rig and am lookig to OC it. Specs of setup are: Asus M4n98td Evo AM3 AMD PII X4 965 be 3.4ghz 125w/ AS5 applied Gskill Ripjaws ddr3 1600 9-9-9-24 1t 4gigs(2x2gigs) OCZ 700w 80+ mod psu Sunbeam cct 92mm HSF/ AS5 applied Sapphire 5770 1g Win 7 pro 64 Fans in 5-80mm, 1-120mm Fans out 2-80mm, 1-120mm I've never OC'd before, and can't find much data on this mobo, so if ne1 can help, it would be great. Idle temp 31c, load 48 @100%. Share this post Link to post Share on other sites More sharing options...
joel.monteiro Posted May 14, 2010 Posted May 14, 2010 If ur a beginner download AMD Overdrive, Increase the multiplier and by 0.5 and run prime 95 or occt test for at least for 30mins ,if stable and no bsod ur in luck,keep repeating this until u get a bsod then increase the Vcore by 0.25 volts if still not stable increase its by another 0.25 thats in total 0.5 volts then keep on repeating this until stability, pretty simply but watch out for ur temps when increasing voltage ,if ur processors isnt a black edition ur in trouble,u will have to Oc by incresing the FSB or Buss speed by 5 increments normally ur buss speed is 200. Share this post Link to post Share on other sites More sharing options...
Praz Posted May 14, 2010 Posted May 14, 2010 then increase the Vcore by 0.25 volts if still not stable increase its by another 0.25 thats in total 0.5 volts Those values should be 0.025V and 0.050V. Share this post Link to post Share on other sites More sharing options...
insan3 Posted May 14, 2010 Posted May 14, 2010 yeah asus can adjust down to .00xx values. i wish gygabite had that Share this post Link to post Share on other sites More sharing options...
Majikdog Posted May 14, 2010 Posted May 14, 2010 (edited) ROck and roll, here we go. And yes 965 is Black Edition. Btw , what is the expected OC on an air system with the HSF and fans I have setup? Also, is the memory OC'able or not worth it? AMD overdrive does not support this mobo... Edited May 14, 2010 by Majikdog Share this post Link to post Share on other sites More sharing options...
joel.monteiro Posted May 14, 2010 Posted May 14, 2010 my bad , mistype by me Share this post Link to post Share on other sites More sharing options...
insan3 Posted May 14, 2010 Posted May 14, 2010 3.8 to 4.1, i find memory OC is only a plus when benchin, not really for day to day things. Share this post Link to post Share on other sites More sharing options...
Majikdog Posted May 14, 2010 Posted May 14, 2010 AOD says "can not detect AMD 7-series chipset" Share this post Link to post Share on other sites More sharing options...
insan3 Posted May 14, 2010 Posted May 14, 2010 i have never software oc, always bios. Share this post Link to post Share on other sites More sharing options...
Majikdog Posted May 15, 2010 Posted May 15, 2010 Roger that on the Bios OC. Share this post Link to post Share on other sites More sharing options...
Jakeb1213 Posted May 16, 2010 Posted May 16, 2010 I have already put together the rig and am lookig to OC it. Specs of setup are: Asus M4n98td Evo AM3 AMD PII X4 965 be 3.4ghz 125w/ AS5 applied Gskill Ripjaws ddr3 1600 9-9-9-24 1t 4gigs(2x2gigs) OCZ 700w 80+ mod psu Sunbeam cct 92mm HSF/ AS5 applied Sapphire 5770 1g Win 7 pro 64 Fans in 5-80mm, 1-120mm Fans out 2-80mm, 1-120mm I've never OC'd before, and can't find much data on this mobo, so if ne1 can help, it would be great. Idle temp 31c, load 48 @100%. Ok I actually have this mobo as well and the same processor. You cannot use AMD Overdrive. It is only for boards with a 790fx. Here is what i have going on right now. I use the Bios for my OC.From what I understand these chips love cold and low voltage. I noticed some of the people telling you what to do are not telling you some important things. Also some are telling you steppings that this board doesnt have. I have my system running at 3884mhz STABLE on Stock Cooler. FSB - 210 Multiplier - X18.5 RAM profile 1600 HT Link - 2310 NB/CPU - 2310 Pretty Sure My voltage is either 1.425 or 1.45 My RAM is made for intels so itll be lower voltage than yours. (My goal was to break 2000mhz) So I got intel RAM that runs lower to start off. RAM is running at 1400 right now on 1.66 volts. I think I left everything else on AUTO so far. Make sure cool n quiet is disabled or you'll get low speed without a load.. Get CPU-Z (checking values in Windows) and PC Wizard(Temps and A lot more). Also disable your fan control which is Q-Fan and use Speedfan. All programs are free. What you should do is start by looking up the specs for you RAM. Write them down. Then up your RAM profile to 1600 in the bios. Set the voltage to what GSKill tells you to use for 1600 or as close as you can as mine is supposed to run at 1.65. but the mobo goes in .02 increments. If you can boot to windows and it doesnt freeze or blue screen you then Shut Down. Go back into bios and only up your multiplier by .5and change your CPU voltage to 1.4250 and reboot. Keep going until you wont boot anymore. Then go back and step it back down 1 notch. Thats approximately your max speed. I cannot stay stable at 3900 yet but im working some of the kinks out. OK now you can move your HT Link and CPU/NB up till it wont boot and then step it back 1 notch. I keep my CPU/NB and HT Link at the same speed. I dont know what the proper HT voltage is so i havent tried to get mine up past 2400 when overclocking. Im sure you can get it and ill let you know when i figure that out. Now weve got the CPU, RAM, and HT set to work better.Still not quite there yet. I then went back in and tried upping the FSB because at this point it was between 3.8 and 3.9 where i was getting something wrong. I upped the FSB 10 points to 210 and reset the HT and CPU/NB to 2310. This game me the 3884 @ 1.4250, RAM 1400 at 1.65v, HT at 2310. This should provide a stable overclock for you. I think it will go higher. Most instability is either from voltage problems or setting something wrong. This mobo is great for overclocking but because its new its hard to get help on it. I hope I did a good job explaining this. The process is new to me as my old board had like 6 sdetting and this one has at least 20 not including the RAM. Share this post Link to post Share on other sites More sharing options...
Majikdog Posted May 16, 2010 Posted May 16, 2010 Jake ur Da Man. followed it to the tee and gtg 3885.11 @1.8.5 Cpu volt @1.425 Ht and Cpu/Nb @2310 FSB @210. Cpu temp stable @34C. here's my CPUz validate : not sure how u insert it in forums?? Let me know. Not sure about the ram part, if I did anything or not. Changed profile to 1600 and set Dram volt to 1.5 . Also TurboV is running, does that make a diff? You said u were able to set ur ram to 1400? Not sure what that translate to and where you do that at in bois. ID : 1190835Submitted by Den | Mon, 17 May 2010 01:07:22 +0200 | Validated by CPU-Z 1.54AMD Phenom II X4 965 Windows 7 (Build 7600) CPU Arch : 1 CPU - 4 Cores - 4 Threads CPU PSN : AMD Phenom II X4 965 Processor CPU EXT : MMX(+), 3DNow!(+), SSE (1, 2, 3, 4A), x86-64, AMD-V CPUID : F.4.3 / Extended : 10.4 CPU Cache : L1 : 4 x 64 / 4 x 64 KB - L2 : 4 x 512 KB CPU Cache : L3 : 6144 KB Core : Deneb (45 nm) / Stepping : RB-C3 Freq : 3884.98 MHz (210 * 18.5) MB Brand : Asus MB Model : M4N98TD EVO NB : NVIDIA nForce 780a SLI SPP rev A2 SB : NVIDIA nForce 780a SLI MCP rev A2 GPU Type : Radeon HD 5770 GPU Clocks : Core 157 MHz / RAM 300 MHz DirectX Version : 11.0 RAM : 4096 MB DDR3 Dual Channel RAM Speed : 700 MHz (3:10) @ 9-9-9-24 Slot 1 : 2048MB (10700) Slot 1 Manufacturer : G.Skill Slot 2 : 2048MB (10700) Slot 2 Manufacturer : G.Skill CPU-Z Forum Banner (BB Code below) Here is my Pc wiz rpt.: PC Wizard 2010 Version 1.94 ------------------------------------------------------------------------------------------ Owner: Microsoft Organisation: Microsoft User: Den Operating System: Windows 7 Professional Professional 6.01.7600 Report Date: Sunday 16 May 2010 at 19:34 ------------------------------------------------------------------------------------------ <<< Voltage, Temperature and Fans >>> > Hardware Monitoring : ITE IT8720F > Voltage CPU : 1.41 V > +3.3V Voltage : 1.15 V > +5V Voltage : 5.04 V > +12V Voltage : 10.33 V > VTT : 1.49 V > VBAT : 3.17 V > Processor Fan : 2319 rpm > Chassis Fan : 2755 rpm > Power/Aux Fan : 2700 rpm > Processor Temperature : 34 °C > Mainboard Temperature : 30 °C > Processor AMD Phenom II X4 965e : Sensor DTS > Core 1 : 35 °C > Core 2 : 35 °C > Core 3 : 35 °C > Core 4 : 35 °C > Energy Power : 119.70 W > ATI Radeon HD 5700 Series : ATI Catalyst Driver > Temperature : 37 °C > Fan : 40.0% > Hard Disk Monitoring : S.M.A.R.T > Hard Disk WDC WD5001AALS-00J7B0 : 34 °C > Hard Disk WDC WD5001AALS-00L3B2 : 33 °C ------------------------------------------------------------------------------------------ ***** End of report ***** Let me know what u think. You have been most helpful. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now