GmAz Posted March 4, 2009 Posted March 4, 2009 Ok, its been ages since I've wanted to overclock. However, I am bored and overclocking popped in my head. I'm slowly upping it and stress testing my system, but I have a question about my CPU-Z memory results. Below is a couple screenshots of CPU-Z. First is the CPU tab, second is the Memory tab. Is the DRAM frequency supposed to be 429? Also, the FSB:DRAM ratio. If its corrent, then no worries, but like I said, its been ages and I just don't know the answer. Also, my motherboard is an ASUS P5N-E Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted March 4, 2009 Posted March 4, 2009 ya just double that and that's your memory speed Share this post Link to post Share on other sites More sharing options...
GmAz Posted March 4, 2009 Posted March 4, 2009 Thanks much! Share this post Link to post Share on other sites More sharing options...
hardnrg Posted March 4, 2009 Posted March 4, 2009 Memory Base clock = 429 MHz Data rate = Base clock x 2 = DDR858 PCrating = Base clock x 16 = PC6864 the 5-6-6-18-2T shows that the timings are on Auto (SPD default)... this is ok while you are overclocking the CPU/FSB/RAM... then when you are done you can reduce the timings on the P5N-E, being an nVidia 6 series chipset, you'll be better off with RAM base clocks < 500 MHz, so don't worry if you have DDR1066 underclocked... you can maybe end up tightening to 5-4-4-12-2T assuming 2x2GB... maybe even CL4 and/or 1T Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now