GerardJg Posted March 31, 2007 Posted March 31, 2007 Whenever I save and exit from bios or restart from windows my system shuts down. Pushing the power button and the system starts normally.???? Share this post Link to post Share on other sites More sharing options...
bldegle2 Posted March 31, 2007 Posted March 31, 2007 are you clocking? this is one behavior that surfaces when clocking the system.....it may be a ram setting, or your vcore needs a little boost, or the overclock needs to be backed down a bit. i have had various processors/setups in the past few years that did this, it always boiled down to a component (MB, RAM, CPU, or just a bios clockage setting or two). i know this doesn't help, but you can play on your own with settings and may just find the sweet spot in the process... baldy Share this post Link to post Share on other sites More sharing options...
GerardJg Posted April 1, 2007 Posted April 1, 2007 An overnight cmos clear did the trick but when I set all voltages and memory speeds as before the problem was back I cleared the cmos again and began using my prior settings again, but this time I only changed several at a time and rebooted until it would shut down, The problem was the chipset voltage at 1.7 or 1.8 is when it will not restart. All my other settings and voltages remain as they were. I just ran prime 95 for about 3 hours with no problems Everything else is running great memtest ok currently at 12x220 mem at 2-2-2-5-7 1t 3.2 volts 11,000+ 3d mark 05 back to playing ( I mean testing) :beer :beer Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now