Sharp Posted December 16, 2006 Posted December 16, 2006 E6 is Based on a Toledo core, X2 CPU with 2nd Core disabled. Share this post Link to post Share on other sites More sharing options...
Sharp Posted December 17, 2006 Posted December 17, 2006 Again using Auto timings except for 3-3-2-8 and, DQS Skew Control.....................Decrease DQS Skew Value.......................0 DRAM Drive Strength..................Level 8 DRAM Data Drive Strength.............Level 3 Max Async Latency....................6ns Dram Response........................Normal Read Preamble Time...................5ns Idle Cycle Limit.....................x16 Dynamic Counter......................Disabled R/W Queue Bypass.....................x4 Bypass Max...........................X4 32 Byte Granularity..................Disabled (4 bursts) From the above screenshot we can determine what all the AUTO values in the bios actually equal. (Will tidy up posts). Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted December 17, 2006 Posted December 17, 2006 good job man...what stepping is that on..? Share this post Link to post Share on other sites More sharing options...
Sharp Posted December 17, 2006 Posted December 17, 2006 It is an E4 Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted December 18, 2006 Posted December 18, 2006 I read that part...but what the stepping on the chip itself... Like KAB1E or KAB2E or KACYE or something like that... Share this post Link to post Share on other sites More sharing options...
Thirdtimelucky Posted December 18, 2006 Posted December 18, 2006 Here is my OC: She will needs 1.47v1 for that but needs 5v+ for 3 Ghz+ she does get a bit warm :/ :eek2: Share this post Link to post Share on other sites More sharing options...
Sharp Posted December 18, 2006 Posted December 18, 2006 dr_bowtie, I knew I should have taken those detail but I rushed to put the CPU in . I will find out. And 3Ghz, I will give it a go. Share this post Link to post Share on other sites More sharing options...
Sharp Posted December 18, 2006 Posted December 18, 2006 Was done using the above settings but, FSB:DRAM ratio = 166Mhz (6:5) FSB = 300 HTT = x3 CPU ratio = X10 Max Async Latency = 8ns Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted December 18, 2006 Posted December 18, 2006 cool man let us know how it primes out... Share this post Link to post Share on other sites More sharing options...
jbody Posted December 19, 2006 Posted December 19, 2006 Just sold my 3700+ KAB3E to a guy at work after getting a 170. 2.75ghz at 1.45v, and after that it started needing volts. Never did get it 3ghz stable, only 2.95ghz at 1.65v. Even on water it was running hot. Cheap and nice to play with right now if you have a spare rig. Share this post Link to post Share on other sites More sharing options...
Sharp Posted December 20, 2006 Posted December 20, 2006 Been busy . Failed prime95 at 1.3v. Increased to 1.35v. Going to see if i can go lower Share this post Link to post Share on other sites More sharing options...
red930 Posted December 20, 2006 Posted December 20, 2006 damn nice. 3GHz on only 1.35v? You got yourself a gem. STEPPING!! lol Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now