AthlonAlien Posted July 6, 2006 Posted July 6, 2006 SOLD Greetings, I am selling my Opteron 165 0610DPMW. I have been running it stable 24/7 at 3.006GHz (334x9) with air cooling (Scythe Ninja). It can pass dual SuperPI 32M, OCCT, 3DMark01/03/05/06, etc. without any problems. It can also dual Prime for about an hour. I have included a CPU-Z verified screenshot below (as that is the only pic I currently have). You can also see by the pic, that this chip has a great memory controller (hence, running 2x1GB sticks at 300MHz). This is by far the best CPU I have ever owned. I'm looking to get $319 shipped out of it. Shipping will be to the CONUS via UPS. I am now including my Scythe Ninja heatsink in the deal. http://valid.x86-secret.com/show_oc?id=101736 Here is another screenshot I just found with the Opty 165 running with a set of OCZ Platinum EBs. http://i82.photobucket.com/albums/j248/AthlonAlien/3ghz.jpg -Thanks Heatware http://www.heatware.com/eval.php?id=37206 eBay Feedback http://feedback.ebay.com/ws/eBayISA...tem=-1&frm=1883 PayPal Verified https://www.paypal.com/us/verified/...112%40aol%2ecom EDIT: Price lowered to $319 shipped and I'm now including my Scythe Ninja heatsink in the deal!! Share this post Link to post Share on other sites More sharing options...
red930 Posted July 6, 2006 Posted July 6, 2006 i dont mean to rain on your parade...but if it can only dual prime for ~ 1hr...then its not really stable in the eyes of most members here Share this post Link to post Share on other sites More sharing options...
AthlonAlien Posted July 6, 2006 Posted July 6, 2006 i dont mean to rain on your parade...but if it can only dual prime for ~ 1hr...then its not really stable in the eyes of most members here I understand that... I was just being honest See below for current fan situation Share this post Link to post Share on other sites More sharing options...
dtess17 Posted July 6, 2006 Posted July 6, 2006 at what speed does it run dual prime stable for longer than an hour? i.e like 20+ Share this post Link to post Share on other sites More sharing options...
red930 Posted July 6, 2006 Posted July 6, 2006 I'm assuming 2.8-2.9GHz most likely. That's a good stepping, it should do 3GHz with no problem on air, but might need at least 1.5-1.55v maybe... Share this post Link to post Share on other sites More sharing options...
AthlonAlien Posted July 6, 2006 Posted July 6, 2006 at what speed does it run dual prime stable for longer than an hour? i.e like 20+ I have never tried for 20+... The longest I have ever ran Prime was about 8 hours. It passed 8 hours at 2.9GHz, then I stopped it. I don't know exactly where the "breaking point" of MHz is. BTW, I took my only case intake fan and put it on my Ninja So I basically have no intake fan(s) and a subpar fan on the Ninja. If I was to put the intake fan back in place and install a good 120mm onto the Ninja, it MAY be 8+ hours stable at 3.0GHz. I don't have any other fans at the moment... but I might try to order a nice 100CFM one for the Ninja -Thanks Share this post Link to post Share on other sites More sharing options...
dtess17 Posted July 6, 2006 Posted July 6, 2006 I have never tried for 20+... The longest I have ever ran Prime was about 8 hours. It passed 8 hours at 2.9GHz, then I stopped it. I don't know exactly where the "breaking point" of MHz is. BTW, I took my only case intake fan and put it on my Ninja So I basically have no intake fan(s) and a subpar fan on the Ninja. If I was to put the intake fan back in place and install a good 120mm onto the Ninja, it MAY be 8+ hours stable at 3.0GHz. I don't have any other fans at the moment... but I might try to order a nice 100CFM one for the Ninja -Thanks you don't need 100cfms for the ninja...hell a nexus fan will do just fine. It's not amount the amount of air going over the fins rather just that some air is. they are spaced apart real well. the best thing you could do is set up a push/pull fan config Share this post Link to post Share on other sites More sharing options...
FrostyAMD Posted July 7, 2006 Posted July 7, 2006 Ygpm Share this post Link to post Share on other sites More sharing options...
AthlonAlien Posted July 7, 2006 Posted July 7, 2006 ^^^ Share this post Link to post Share on other sites More sharing options...
SLI-DR User Posted July 8, 2006 Posted July 8, 2006 1.37+104% 335x9.0 for that stepping is stable more than 24+ hours. bump from mei Share this post Link to post Share on other sites More sharing options...
young-blood Posted July 8, 2006 Posted July 8, 2006 1.37+104% 335x9.0 for that stepping is stable more than 24+ hours. bump from mei Wha? Your chip...er, I'm lost. What can you get at stock? BUMP for a nice chip with a killer price! Share this post Link to post Share on other sites More sharing options...
RPGWiZaRD Posted July 8, 2006 Posted July 8, 2006 do you do international shipping? Share this post Link to post Share on other sites More sharing options...
Recommended Posts