daNutz Posted June 9, 2006 Posted June 9, 2006 Hi all, I have a revision A00 SLI-DR and i was wondering if the raid controlers on this board are locked cos whenever i try and go over 200 fsb i can never get into windows, even if everything is underclocked IE CPU MEM. the only thing i can think of is that the raid controlers are not locked. what do you all think..? Share this post Link to post Share on other sites More sharing options...
CPDMF Posted June 9, 2006 Posted June 9, 2006 The controllers are locked solid. What settings are you using for your 4 X 512? Share this post Link to post Share on other sites More sharing options...
wevsspot Posted June 9, 2006 Posted June 9, 2006 Disable CPC if you haven't already done so. Also, disable dynamic counter. Share this post Link to post Share on other sites More sharing options...
daNutz Posted June 10, 2006 Posted June 10, 2006 Right ive now found out that my boards HT will not go over 1150, not even if i increase the voltage.. it always crashs. Im still ahving trouble getting my memory stable above 200 aswell,,,,,,, im pretty sure its not the chip as ive had about 9 A64 cpus in this board and not 1 has aloud me to run my mem over 200 fsb so im guessing its gotta be the board.. Ive tried things ive people have suggested in another post that i made but it just hasnt helped. other post wot should i do..? Share this post Link to post Share on other sites More sharing options...
wevsspot Posted June 10, 2006 Posted June 10, 2006 Have you decreased your LDT multiplier to three? Share this post Link to post Share on other sites More sharing options...
daNutz Posted June 10, 2006 Posted June 10, 2006 yes lol ! Share this post Link to post Share on other sites More sharing options...
daNutz Posted June 13, 2006 Posted June 13, 2006 Bump Share this post Link to post Share on other sites More sharing options...
wevsspot Posted June 13, 2006 Posted June 13, 2006 First off there's no such thing as the RAID controllers being locked. Only the appropriate SATA or IDE channels that constitute the ARRAY are locked. I can confirm that all of the SATA channels on NF4 m/b's are locked. I think your problem is trying to run 4X512 memory sticks and expecting to overclock. That's a huge load on both the motherboard and the on-die memory controller of the Opty processor you're running. As an experiment take it back to 2X512 in the orange slots and see what happens. p.s. If you insist on running 4X512 you'll need to disable CPC and run at 2T command rate. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now