daNutz Posted June 8, 2006 Posted June 8, 2006 Bump Share this post Link to post Share on other sites More sharing options...
SLI-DR User Posted June 9, 2006 Posted June 9, 2006 this might help you, good luck http://xtremesystems.org/forums/showthread.php?t=57317 Share this post Link to post Share on other sites More sharing options...
Who Posted June 9, 2006 Posted June 9, 2006 Something to try...By dropping the cpu multiplier you can more easily find the max of your ram, which gives you a clearer idea of where your problem is. Â Use only two sticks...try to make sure they're from the same original set. Make sure they're placed in the correct slots. I don't remember which slots you're supposed to use with the dr board... Â For testing I'd recommend a quick and dirty with superPI 32m run (25-35min dependent on mhz). Â CPU Multiplier 8 CPU VID Startup Value 1.45 CPU VID Control 1.525 CPU VID Special Control auto HTT (LDT/FSB) 3 FSB 250 (test at 250, then add 10fsb after each test) Memory FSB 1:1 with FSB Memory Voltage 2.8 (2.7-2.92 whatever works best for your sticks) Mem and Ratio 200/1:1 CPC Enabled (1T timing) Tcl 2.5 Trcd 3 (can try 4 here when you hit 290-310) Tras 8 Trp 3 (can try 4 here when you hit 290-310) Trc 10 Trfc 14 Trrd 2 Twr 2 Twtr 2 Trwt 2 Tref 3120 Odd Div dis Dram B Interleave dis DQS Skew dis DQS Skew Val 0 DRAM Dr Str 7 DRAM Data Dr Str 1 (or 4) Max Async Lat 8 (7 will work sometimes...) Dram Response Time Normal Read Premable Time 5.5 (or 6) idlecycle limit 256 dynamic counter dis r/w queue bypass 16 bypass max 7 32 byte granularity dis Share this post Link to post Share on other sites More sharing options...
daNutz Posted June 10, 2006 Posted June 10, 2006 didnt help Share this post Link to post Share on other sites More sharing options...
kitfit1 Posted June 10, 2006 Posted June 10, 2006 I'm using the same ram as you daNutz. I changed the ram in my sig to 4800 plats. If you have a look here, that set up is rock solid and is still the same today, just with 4800 plats rather than G-skill. Give it a try and let us know how things go. Share this post Link to post Share on other sites More sharing options...
daNutz Posted June 13, 2006 Posted June 13, 2006 Bump Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now