jadit2 Posted May 25, 2006 Posted May 25, 2006 I dont get it.... according to this article: http://www.cluboverclocker.com/reviews/mem...tinum_2gb/2.htm they where able to get this memory at stock voltage and stock timings to 460MHz! My same memory crashes at just 420 Mhz with less than 10min into the memory tester. Iv tryed 3-3-2-8 at 2.6v with the 210 Mhz with failings. I know for sure that my CPU can hit 245 Mhz bus without any problem. Any other options/settings I should be looking into? Share this post Link to post Share on other sites More sharing options...
ronin688 Posted May 25, 2006 Posted May 25, 2006 I dont get it.... according to this article:http://www.cluboverclocker.com/reviews/mem...tinum_2gb/2.htm they where able to get this memory at stock voltage and stock timings to 460MHz! My same memory crashes at just 420 Mhz with less than 10min into the memory tester. Iv tryed 3-3-2-8 at 2.6v with the 210 Mhz with failings. I know for sure that my CPU can hit 245 Mhz bus without any problem. Any other options/settings I should be looking into? First try these settings straight from OCZ for the Ultra-D with this memory. That's a good place to start but you should be able to get more out of them with those. Check my sig, I've got the same memory and mobo, and I've got my RAM at [email protected] with 2.5-3-2-5 and I've memtested it stable up to 225Mhz with those timings. Good luck, those settings might not entirely work for you, but should give you a place to get started! EDIT: Sorry forgot the link I meant to put in there, here you go. http://www.bleedinedge.com/forum/showpost....173&postcount=5 Share this post Link to post Share on other sites More sharing options...
jadit2 Posted May 25, 2006 Posted May 25, 2006 Thanks! Ill check this out. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now