OCZ PC3200 Platinum 2Gb

[jadit2]

I dont get it.... according to this article:

http://www.cluboverclocker.com/reviews/mem...tinum_2gb/2.htm

they where able to get this memory at stock voltage and stock timings to 460MHz! My same memory crashes at just 420 Mhz with less than 10min into the memory tester.

 

Iv tryed 3-3-2-8 at 2.6v with the 210 Mhz with failings. I know for sure that my CPU can hit 245 Mhz bus without any problem.

 

Any other options/settings I should be looking into?

[ronin688]

I dont get it.... according to this article:

http://www.cluboverclocker.com/reviews/mem...tinum_2gb/2.htm

they where able to get this memory at stock voltage and stock timings to 460MHz! My same memory crashes at just 420 Mhz with less than 10min into the memory tester.

 

Iv tryed 3-3-2-8 at 2.6v with the 210 Mhz with failings. I know for sure that my CPU can hit 245 Mhz bus without any problem.

 

Any other options/settings I should be looking into?

 

First try these settings straight from OCZ for the Ultra-D with this memory. That's a good place to start but you should be able to get more out of them with those.

 

Check my sig, I've got the same memory and mobo, and I've got my RAM at [email protected] with 2.5-3-2-5 and I've memtested it stable up to 225Mhz with those timings.

 

Good luck, those settings might not entirely work for you, but should give you a place to get started!

 

EDIT: Sorry forgot the link I meant to put in there, here you go.

 

http://www.bleedinedge.com/forum/showpost....173&postcount=5

[jadit2]

Thanks! Ill check this out.