ledzep58 Posted March 20, 2006 Posted March 20, 2006 I started building the system follow the great guide that Chynn put on another tread. Anyway I have the expert mobo with OCZ 2X1G Plat. If I put either stick in dimm 2 and run the memtest all is find. as soon as I put both sticks in dimms 2&4 tried 1&3 get the diag. lites 2,3,and4 on which indicate CPU detected - no post. It just sits there. Do I have 1. bad mobo or 2. bad memory? all help is appreciated. thanks Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted March 20, 2006 Posted March 20, 2006 Asus P4C800 E DeluxeIntel 3.06Ghz 2x1G Corsair PC3200 ATI 9600 Pro M-Audio Revolution 7.1 Seagate 2X160Gb Nec Blk. DVD+/- RW 3520A I think maybe you need to find the Asus forum as this forum is for DFI motherboards... Share this post Link to post Share on other sites More sharing options...
davey_crocket Posted March 20, 2006 Posted March 20, 2006 Hmm, i see the words at the top of his spec saying old system. I think what he really needs to do is update his sig to display his current config. Share this post Link to post Share on other sites More sharing options...
ledzep58 Posted March 20, 2006 Posted March 20, 2006 This is a new system my sig. had the old. Checked sig. I had to work a good part of the weekend and was just too tired last night to do more. Share this post Link to post Share on other sites More sharing options...
Prostock62 Posted March 20, 2006 Posted March 20, 2006 Have you tested each stick by itself? That should rule out the memory if all is good.You probley need a bios update to support the cpu.Stock bios? Share this post Link to post Share on other sites More sharing options...
ledzep58 Posted March 20, 2006 Posted March 20, 2006 Yes, both memory sticks work fine individually in dimm2, memtest runs fine. Share this post Link to post Share on other sites More sharing options...
ledzep58 Posted March 20, 2006 Posted March 20, 2006 OK, at this time, all I have connected,is the motherboard, cpu, video card and 1 stick of memory. everything is installed but not connected. Share this post Link to post Share on other sites More sharing options...
chynn Posted March 20, 2006 Posted March 20, 2006 OK, at this time, all I have connected,is the motherboard, cpu, video card and 1 stick of memory. everything is installed but not connected. Hi there, ledzep58 ... and thanks for the compliment ... Which OCZ memory are you using??? And did you use the "stock" 200MHZ settings for it?? Did you double-check your GENIE BIOS settings??? For example, my OCZ runs 2-3-2-5 @ 200MHZ but the GENIE BIOS wants me to put that in as 2-3-5-2 ... which I screwed up the first time around so one stick would work, but two wouldn't. And last, do you happen to have another PSU floating around?? I have seen some posts in these forums about the Seasonics doing wierd things at post. Don't know if that applies to your PSU or not. Just a thought though. Hope this helps ... Share this post Link to post Share on other sites More sharing options...
ledzep58 Posted March 21, 2006 Posted March 21, 2006 I have the 2 GB (2 pcs 1GB) DDR (400) PC-3200 OCZ Dual Channel Platinum (OCZ4002048ELDCPE-K). I set the genie bios up according to the BE website for this motherboard / memory combo. I don't have another PSU. the issue is that when I tested one stick at a time they worked. If both are in dimms 2&4 the diag. lighst show: 2,3 and4 on - which indicates CPU detected. also the bios is old and the rev. on the mobo is AA0 Share this post Link to post Share on other sites More sharing options...
ledzep58 Posted March 23, 2006 Posted March 23, 2006 this is on the BE site forum also just trying to get ideas as to where the problem(s) are: RyderOCZ from BE site, wanted me to do the following: Try this for me please: Clear the CMOS on the board Insert 1 stick into the farthest orange slot from CPU Boot to Memtest (just enable it on the Genie Bios page, then reboot.) Note the timings that are displayed (info on what you should see is here: http://www.bleedinedge.com/forum/sho...98&postcount=6) Now power down the machine Clear the CMOS again and swap sticks (replace with other stick and again put it in the orange slot farthest from CPU) Now power up and again boot to memtest. Note the timings....are they the same as the other stick? so I did this and here are the results: OK, didn't get home from work yesterday until 8 pm so did nothing, Today I did what you asked and here are the timings: one stick timings 2-3-2-5 runs clean no errors 2 passes other stick timings 2.5-3-2-5 errors 2 passes test failing addr: good bad er-bits count 6 0002a08c230 04000000 05000000 01000000 4 the address is the same just error-count goes up also when both sticks are in system - no post, no boot diag. lights 2,3 and 4 on which indicate CPU detected really not sure where the problem is. Also just so you know there are no disk and no OS installed thanks Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now