Expert / x2 4400+ / OCZ Plat PC4000 EB 2GB /

[urbanride]

iv been trying to overclock this bish.... i cant seem to get anything running at 2.3ish+ghz iv looked at some of the overlock datatabase settings and tried it and memtest will error out like crazy around %40 .... am i missing something ... does somebody have my setup? any help would be awesome

[malvare1]

you might have memory timmings issues. try to look in the database for your memory and compare the genie bios settings.

[Guest Dynamic]

Why don't you post what you've done as far as voltages and FSB/HTT so if there is anyone in the forum with the same setup can easily assist you.

[urbanride]

well i started with:

 

http://www.dfi-street.com/forum/showthread.php?t=38535

 

i got as far as 210 x 11 with 2.6vdim (looking at a few reviews i should not need more that 2.7 to break 275 at 3-3-8-3 or so

 

then i tried all the settings i saw here:

http://www.bleedinedge.com/forum/showthread.php?t=15934

 

again no luck

 

 

then i tried going over the overclock guide and setitng my own with what iv seen the ram could do from reviews ... again no luck

[urbanride]

i just tried:

 

In Genie Bios

 

250

auto

16 16

9 (this keeps the CPU at stock for now)

100

disable

1.425v

1.425V

auto

1.30v

1.68V

2.72V

 

DRAM Config

 

200

enable

3

3

8

2

10

16

3

3

2

3

3120

auto

enabled

auto

0

Level 8

level 2 (30% reduce)..try Level 1 also

8ns, try 9 here also

normal

6ns try 6.5 if MAL is 9ns

128 or 256

disable

16

04

disable

 

as recomended by a ocz rep ... dident work