bmaffin13 Posted November 15, 2005 Posted November 15, 2005 Ok i have searched and read everything i could find. here is my problem. I have had it running perfectly stable with 4x512 for about a month or more on my old 3000+ and then for some reason it wouldn't boot. So i take 2 stick out and its fine, tried to put in the other 2 sticks back in and it has never worked since. That was about 1.5 months ago. Since then i have bought a 3800+x2, and still a no go. I have not changed the bios or anything because i had it running fine with the 704 big toe bios. Now, i tried it today (to put in my other gig) and now no matter what i do, i can't even get it to boot with one stick. 2 of the 4 sticks i get the beeeeeeeeeep silence beeeeeeeeeeeeep silence..... With the other 2, it doesn't do that beep, but it stop on the DFI boot logo screen, and stays there. I know all 4 sticks are still good because they all work in other computers. here is everything i tried so far: pull the battery reset the cmos (both for about 4 hours) tried all combinations of ram let it sit there cause that used to work when this happened ram fed from 3.3v, and 5v, and the 3.3v+ trick off the 3.3v rail there is probably more, just can't remember and really friggin frustrated. Any help appreciated. Thanks ps sorry for the bad capital's and such EDIT: leaving the cmos in the reset position over night and all day while im at work, hoping that 20 hours will reset it cause sure 4 doesn't. Share this post Link to post Share on other sites More sharing options...
Squid1 Posted November 15, 2005 Posted November 15, 2005 Isn't it obvious one of your sticks broke? Share this post Link to post Share on other sites More sharing options...
bmaffin13 Posted November 15, 2005 Posted November 15, 2005 ive tried every stick single, and in other computers and they are fine Share this post Link to post Share on other sites More sharing options...
Squid1 Posted November 15, 2005 Posted November 15, 2005 Hm, maybe suffering from the potential memory controller damage from voltage differential between RAM and CPU? At what volts did you run the RAM and at what volts did you run your CPU? Share this post Link to post Share on other sites More sharing options...
Brambey Posted November 15, 2005 Posted November 15, 2005 You can damage your processor like that? Woa. Share this post Link to post Share on other sites More sharing options...
bmaffin13 Posted November 16, 2005 Posted November 16, 2005 cpu at 1.56v and ram at 3.3v gunna go try it now with one stick, after resetting cmos for 16 hours Share this post Link to post Share on other sites More sharing options...
bmaffin13 Posted November 16, 2005 Posted November 16, 2005 no go on my computer, here is stick one on another computer Share this post Link to post Share on other sites More sharing options...
bmaffin13 Posted November 16, 2005 Posted November 16, 2005 stick #2 on another comuter Share this post Link to post Share on other sites More sharing options...
bmaffin13 Posted November 16, 2005 Posted November 16, 2005 ok so all sticks work on my both my nforce 2 boards (asus and abit), but non work on either one of my dfi's one sli-dr and one ultra-d. Also i took the ram out of another computer and now my computer is now working with 2x512mb of some ShikaXram which is micron chips. So neither is "broken" but they don't work together, so as far as im concrned they are all broken. Now the question is, what do i RMA since i paid for it all to work, and it doesn't. Share this post Link to post Share on other sites More sharing options...
bmaffin13 Posted November 17, 2005 Posted November 17, 2005 TTT Anyone else got any ideas? Share this post Link to post Share on other sites More sharing options...
JiminyC Posted November 17, 2005 Posted November 17, 2005 goto mushkin's forum and message zebbo. the redline, 512's are known to be problematic with dfi mobo's. Share this post Link to post Share on other sites More sharing options...
Dave_Sz Posted November 17, 2005 Posted November 17, 2005 I'm guessing you're already running them with CPC disabled and on the 166 divider? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now