S][R_KILL@LOT Posted August 14, 2005 Posted August 14, 2005 So i wana flash my bios with a higher core volt.. i got this gigabytes utility for flashing bioses ... dont know what its called right now.... it comes bundled with every gigabyte card.. anyway i heard somewhere that i dont have to create a boot disk and do the flashing from dos, but i can do it from windows with that utility... so is that true and, is tht proces as harmless as it seems? also what program should i use to check my current core volt? and how much should i increase the core colt ( 0.1V maybe? ) ? Share this post Link to post Share on other sites More sharing options...
markiemrboo Posted August 14, 2005 Posted August 14, 2005 NiBiTor (edit BIOS) WinFox (Leadtek Windows flash thing) That's what I used... Share this post Link to post Share on other sites More sharing options...
S][R_KILL@LOT Posted August 14, 2005 Posted August 14, 2005 Winfox should work for gigabyte cards too... or should i use what i got from gigabyte.. i thinks its called " @VGA "... and the proces is relativly harmles... right? :-)... its nwe i dont wana mess it up just yet ;-) Share this post Link to post Share on other sites More sharing options...
markiemrboo Posted August 14, 2005 Posted August 14, 2005 Winfox should work for gigabyte cards too... or should i use what i got from gigabyte.. i thinks its called " @VGA "... and the proces is relativly harmles... right? :-)... its nwe i dont wana mess it up just yet ;-) 527889[/snapback] Should do. I flashed mine about 20 times successfully. If you've got half a brain I am sure you'll be alright Share this post Link to post Share on other sites More sharing options...
S][R_KILL@LOT Posted August 14, 2005 Posted August 14, 2005 (edited) mkey, thanks... btw.. i should modify the bios with a 0.1V increase ..right? and whats your stock and modified core volts.. doesnt hurt to ask Edited August 14, 2005 by S][R_KILL@LOT Share this post Link to post Share on other sites More sharing options...
markiemrboo Posted August 14, 2005 Posted August 14, 2005 Stock should be 1.2v and I ran... 1.3v Share this post Link to post Share on other sites More sharing options...
S][R_KILL@LOT Posted August 14, 2005 Posted August 14, 2005 (edited) allright thanks again... should be bac soon with results... ;-) EDIT: downloaded NiBiTor and under the voltage section i can onlychange from 1.1v, 1.2v( current),1.4V ..and when i use the "extend voltage table" check box i get the 1.5V option.. how`d you get it @ 1.3V? and would it work fine @ 1.4V... or is it overkill? Edited August 14, 2005 by S][R_KILL@LOT Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now