Dragon Slayer Mini-Tower Case from In Win Evaluated
#1
Posted 19 August 2010 - 08:27 PM
Intel Core 2 Quad Q9550 2.83GHz / ASUS P5Q Deluxe / Patriot Extreme Performance 2GB PC2-9600 DDR2-1200MHz / 2x Seagate ST3160827AS 160GB RAID 1 / Seagate ST31000340AS 1TB
Corsair TX750W / Sapphire HD 5870 1GB GDDR5 / SilverStone TJ05 / Scythe Zipang 140mm CPU Cooler / ASUS VH202T-P 20" widescreen monitor (x2) / XP Pro SP 3
"however, i cannot claim to be such a fish as i am not a fish at all..." - hardnrg,Jul 4 2005, 02:49 PM

#2
Posted 19 August 2010 - 11:50 PM

>> >>Buy my stuff!!<< <<
XT-1264, X-Fighter, M59, Element T
Lappy - Gateway FX P-7805u - C2D E8400 - 4gb DDRIII - Nvidia 9800M 1gb discrete (1920x1200) - 320gb hdd
Core2Duo E8400 - DFI Lanparty UT P45-T2RS - 4gb OCZ Reaper HPC DDRII 1066 - 600W OCZ GameXStream - Visiontek HD4870
Core i7 920 @ 4.00GHz - DFI LP UT X58-T3eHS - Mushkin 3x 2gb DDR3 - 700W OCZ ModXStream Pro - 2x Sapphire Radeon HD4870 Toxic Ed.
Come join OCC IRC... /server irc.skullboxz.net /join #occ Use the Occ IRC JApplet or check out an IRC Client: mIRC : XChat : HydraIRC
Follow OCC on 
#4
Posted 23 August 2010 - 09:45 PM
#5
Posted 23 August 2010 - 09:52 PM
Couldn't you still remove the top 140mm fan and attach your 120mm fan there? It looks to also handle a 120mm fan on top as well as the 140mm it comes with.I was just looking at this case the other night. Unfortunately you can't use a 120mm fan in the back so it negates the H50 or H70 I wanted to use. Nice case though.

>> >>Buy my stuff!!<< <<
XT-1264, X-Fighter, M59, Element T
Lappy - Gateway FX P-7805u - C2D E8400 - 4gb DDRIII - Nvidia 9800M 1gb discrete (1920x1200) - 320gb hdd
Core2Duo E8400 - DFI Lanparty UT P45-T2RS - 4gb OCZ Reaper HPC DDRII 1066 - 600W OCZ GameXStream - Visiontek HD4870
Core i7 920 @ 4.00GHz - DFI LP UT X58-T3eHS - Mushkin 3x 2gb DDR3 - 700W OCZ ModXStream Pro - 2x Sapphire Radeon HD4870 Toxic Ed.
Come join OCC IRC... /server irc.skullboxz.net /join #occ Use the Occ IRC JApplet or check out an IRC Client: mIRC : XChat : HydraIRC
Follow OCC on 
#6
Posted 23 August 2010 - 10:50 PM
Couldn't you still remove the top 140mm fan and attach your 120mm fan there? It looks to also handle a 120mm fan on top as well as the 140mm it comes with.
I just took a look at the board and would say no. I use tall memory sticks, 2+1/8 inches to be exact. Although they would "probably" not be in the way I also took in where the processor would be inre to the 1 or 2 fans and the radiator. And then you have the actual heat sink/impeller-pump. Would be a tight fit indeed if I thought it would actually work but from all the pictures I've seen from other sites I don't think it will. And personally I wouldn't want to put it up top anyways. Thanks for the input though.
And tonight I looked over at the egg for a replacement. Ironically the only other small case I could find that gave the right amount of room for a large video card and mounting the radiator was the CM341 also inn the review. Not as nice and not as "airy" but It will suffice.
Edited by maj.meathead, 23 August 2010 - 10:53 PM.
#7
Posted 12 September 2010 - 03:21 PM















