Guest AnthraX Posted May 28, 2005 Posted May 28, 2005 Arg, this is driving me insane! I just got: DFi Lanparty UT Ultra-D AMD athlon 3500 64bit (Winchester) 2x OCZ PC3200 512MB 2-3-2-5 (In slot 1 and 3) OCZ Modstream 520W MSI 6600GT Seagate 200GB When I plug the power cord from the wall sokcet to the PSU the DRAM led turns on and the Stand By led. And when i press the power button 4 red leds blink for a second and nothing happens, and it just hangs like that. Everything is connected correctly (I think). I tried to look it up the manual for the DFI but that doesn't tell me anything Does anyone know what's wrong? EDIT: Pictures: Share this post Link to post Share on other sites More sharing options...
mucker Posted May 28, 2005 Posted May 28, 2005 There are 2 more power connectors on the board that need to be plugged in. See manual for location. You may have to use your floppy power connector as the board requires one. If you plan to use a floppy, you'll need 2 floppy power connectors. You can get one here: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...6772627278&rd=1 You may want to try using slots 2+4 for ram also. m Share this post Link to post Share on other sites More sharing options...
Guest AnthraX Posted May 28, 2005 Posted May 28, 2005 Are both connectors necessary(Floppy and Molex)? I plugged the Molex one in and nothing happened Share this post Link to post Share on other sites More sharing options...
mucker Posted May 28, 2005 Posted May 28, 2005 Yes all of them are necessary. It could be your ram though. I just noticed you may want to try slots 2+4. What bios are you using? Share this post Link to post Share on other sites More sharing options...
Guest AnthraX Posted May 28, 2005 Posted May 28, 2005 Dont know, got it out of the box today. Share this post Link to post Share on other sites More sharing options...
mucker Posted May 28, 2005 Posted May 28, 2005 It's more than likely 1/25. I would suggest using one stick of ram in the orange slot farthest away from the CPU, all 4 power connectors, boot, add your second stick, and then flash the bios to 3/10 or the new 510 beta. Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted May 28, 2005 Posted May 28, 2005 please check the rules and the Important Info threads stuck to the top of this section. If you are looking for help, reading this is the most important first-step for you to take. this helps us tremendously to help you solve your issue if we can see what is in your system every time you post: PLEASE SEE THIS LINK!: http://www.dfi-street.com/forum/showpost.p...701&postcount=2 Be as thorough as possible please. Voltages, timings, settings, bios version, etc. The more information you give us about the problem, and the more details about your hardware in your sig = more help we can give you. Share this post Link to post Share on other sites More sharing options...
Guest AnthraX Posted May 28, 2005 Posted May 28, 2005 Connected both the power cables and nothing happened :sad: I tried the orange slot (nr 2, right?) but the same thing happens. Could it be some short circuit that isn't allowing the rig to boot? And every voltage and stuff like that is at default. I got some Jumper thingies with the mobo, are those extra/spare or should they go somewhere? Share this post Link to post Share on other sites More sharing options...
garybig Posted May 28, 2005 Posted May 28, 2005 mine ran a week before that happened all diagnostic lites up and doesent go off i rma d mine to new egg and waiting. during the time it did run it was awsome Share this post Link to post Share on other sites More sharing options...
Guest AnthraX Posted May 28, 2005 Posted May 28, 2005 mine ran a week before that happenedall diagnostic lites up and doesent go off i rma d mine to new egg and waiting. during the time it did run it was awsome Mine lite up and go off a second after that. Share this post Link to post Share on other sites More sharing options...
red930 Posted May 28, 2005 Posted May 28, 2005 Make sure you build your sig here... http://www.dfi-street.com/forum/usercp.php? Use this thread as a guide... http://www.dfi-street.com/forum/showthread.php?t=6615 Share this post Link to post Share on other sites More sharing options...
garybig Posted May 28, 2005 Posted May 28, 2005 well would appear not to be the same problem. my dig lites stayed lit. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now