facasi Posted May 8, 2005 Posted May 8, 2005 HI, I was running Prime 95 and the actual temps are: CPU = 46 C PWM IC = 48 C CHIPSET = 52 C Please see the attached picture The ones I think is high are PWM IC and the CHIPSET temps What do you guys think?? Share this post Link to post Share on other sites More sharing options...
Aldersix Posted May 8, 2005 Posted May 8, 2005 Your PWMIC temps are fine take a look at ExRoadie Post here. Here is the complete thread if you want to read. Also your Chipeset temp are what others are running at prime do a search and you will find similar results. I'm priming now and mine is at 51C. If you are concerned on about your chip set temps do a seach and you will find a thread talking about removing your chipset fan and replacing with other TIM to lower those temps. My CPU temps is running 47,47C while priming. I have my vcore set to 1.325 + 126% hope this helps Share this post Link to post Share on other sites More sharing options...
facasi Posted May 8, 2005 Posted May 8, 2005 Thanks! Share this post Link to post Share on other sites More sharing options...
monsterzero Posted May 9, 2005 Posted May 9, 2005 I just installed Smart Guardian just now and it seems the temps are in the wrong place, at least according to Everest. In Everest the cpu is in the 40's but in SG the cpu temp is in the 20s instead. There is low temp like that in Everest but its called Auxillary. Very confused :drool: Share this post Link to post Share on other sites More sharing options...
Stop_Sign Posted May 9, 2005 Posted May 9, 2005 I think those are a bit high for stock speed. When I primed with 100mhz overclock I had lower temps than you, especially on the chipset. Maybe mine are inaccurate, maybe not. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now