Guest Down1oader Posted February 11, 2005 Posted February 11, 2005 thats right im still installing, i tried sticking in my audigy 2 cd, as soon as i press install it give me the BSOD and my pc reboots. Installed the newest omega drivers based on 5.1 catalyst, i got to display properties and it isnt there! it says this in adapter unavailable then i click properties for the adapter and it says Vga-save service, mode system, status started under resources there are conflicts which are as follows Input/Output Range 03B0 - 03BB used by: nForce4 PCI-Express Root Port Input/Output Range 03C0 - 03DF used by: nForce4 PCI-Express Root Port Memory Range 000A0000 - 000BFFFF used by: nForce4 PCI-Express Root Port my x850 is in pcie 1 my audigy 2 is in my bottom pci slot and my karajan is plugged in as normal. i cant believe its taking so long to setup this system.... think i should also mention what is not recognised in device manager bearing in mind i should only have to install the audigy 2 and x850 multimedia audio controller pci input device video controller video controller (vga compatible) nforce chipset drivers installed are 6.39 Share this post Link to post Share on other sites More sharing options...
Guest bradmax57 Posted February 12, 2005 Posted February 12, 2005 mmm i havent tried mine yet although I couldnt get it to install properly on my nf3 setup? not very helpful i know Share this post Link to post Share on other sites More sharing options...
cpuz Posted February 12, 2005 Posted February 12, 2005 Ok, So you installed a FRESH copy of win xp w/ sp2, i assuming, right? What order did you install your drivers once you got into windows? If your using Audigy 2 , you have disabled the onboard audio in the bios under the "genie bios" right? Default is "auto". Share this post Link to post Share on other sites More sharing options...
Guest Down1oader Posted February 12, 2005 Posted February 12, 2005 ok installed fresh sp2, installed: marvel lan drivers usb 2 drivers nforce drivers audio realtek drivers turned off ac 97 in bios from auto installed sp2 installed graphics card drivers nothing worked tried to get audigy 2 load but it bsods as soon as in press install in the setup menu! Share this post Link to post Share on other sites More sharing options...
jikdoc Posted February 12, 2005 Posted February 12, 2005 sounds like a problem with your dvd/cd drive. i have an audigy2 and x850xtpe installed as well. i had the same problem with consistent bsod everytime i loaded a cd into the drive. check your ide cables. i was using a pair of IOSS gladiator round ide cables (supposed to give better transfer rates and is well shielded) but it was incompatible with the dfi mobo as was my zippy psu. once i used the dfi supplied round cables all was well. Share this post Link to post Share on other sites More sharing options...
mightynimrod Posted February 12, 2005 Posted February 12, 2005 Can i just ask you why, if your going to be using an Augigy have you got the onboard sound plugged in? Could that in itself be giving you stablility problems due to IRQ sharing ? Share this post Link to post Share on other sites More sharing options...
mightynimrod Posted February 12, 2005 Posted February 12, 2005 As for the X850 drivers - you need the .net framework i think Share this post Link to post Share on other sites More sharing options...
jikdoc Posted February 12, 2005 Posted February 12, 2005 As for the X850 drivers - you need the .net framework i think only if you want to use the bloatware catalyst control center, othewise i wouldn't bother Share this post Link to post Share on other sites More sharing options...
Guest Down1oader Posted February 12, 2005 Posted February 12, 2005 does xp sp2 and sp1 not come with .net framework???? i have been using all cables supplied with the mother board going to try unplugging the karajan module, i like to have everything installed just incase but i reckon this could be my main problem, gonna have some holes at the back of my case now, and the fact that theres a plastic thing on the module plugging into the motherboard means i have to unscrew the mother and pull it out again! omg. Share this post Link to post Share on other sites More sharing options...
Guest Down1oader Posted February 12, 2005 Posted February 12, 2005 ok uninstalled karajan audio module used driver cleaner to get rid of ati stuff installed .net 1.1 from microsoft download centre then i installed catalyst 5.2, x850xtpe now works!!!!!! ok now to fix my audigy 2.... Share this post Link to post Share on other sites More sharing options...
Guest Down1oader Posted February 13, 2005 Posted February 13, 2005 ok now ive tried installing the sound cards drivers and my system wont do it! it detects the creative audigy 2 wdm processor but half way through installing its drivers it says data invalid! grrrrrrrrrrrrrr Share this post Link to post Share on other sites More sharing options...
Guest Down1oader Posted February 13, 2005 Posted February 13, 2005 tried going to regedit and setting permissions to full control, didnt work, now trying other pci slot... Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now