Lancool II and Asus X570-P RGB question

[weplini]

Hello,

I recently got a Lian Li Lancool II and a Asus X570-P motherboard.

How do I connect the front RGB from the case to the motherboard?

The case has a 4 pin female ARGB cable that comes from the top of the case from the controller and on the bottom left in the back it has a splitter (i think) with 2x3pin RGB connectors, one goes to the front panel led strips and one has a 3Pin female to 4Pin male adapter (this I guess it's for conecting other RGB devices to the controller).

I have connected the long cable that comes from the top of the case to the motherboard 5V ARGB header but I cannot seem to be able to control it at all 

Corsair iCue only shows 2xRGB Headers (the 12V ones) and Asus Aura software doesn't change the RGB. Also, the motherboard section is greyed out and I can't control the chipset RGB.

Program versions: Asus Aura: 1.07.79 ; iCue: 3.25.60

The case manual is not helpful in this regard.

If it's of any importance, the rest of my rgb setup is as follows:

3x Phanteks Neon Led Strip + 3x Corsair ML120 Pro connected to Corsair Lightning Node Pro

Corsair controller is connected to USB 2.0 header on the MB.

Thanks in advance.