Feel_IT Posted July 1, 2012 Posted July 1, 2012 Hey. I am new on this site so pls bare with me . So i have problem with overclocking my cpu. I cant ewen get it past 3.0ghz . I read alot of oc guides and try many thinks but nothing helps me. My computer is:intel core 2 quad q9550 3.0 with zalman cnps 10x performa cooler on it kingston value 2x2gb 800mhz ram asus p5q turbo motherboard LC power arkangel 850w power supply I always get same error in prime 95:FATAL ERROR: Rounding was 0.5, expected less than 0.4 i get this error on 2 of my cores at almost same time when i start the test. I already got my core volts to 1.4V . I ewen tried to higher up my SB and NB and DRAM voltages but nothing helped me. I still got same error. I am almost hopeless. I think i will newer be able to OC my pc. I am trying it for already 1 year. Here are some pictures of my settings: http://shrani.si/f/2m/QC/Z34mUv0/pa280019.jpg http://shrani.si/f/1F/Vr/4vVTElEj/pa280015.jpg this are my rams: http://www.valueram.com/datasheets/kvr800d2n5_2g.pdf if anyone know what could solve my problem i would be very happy if u need anything else let me know:) (sry for my bad english ) Have a nice day.HF Share this post Link to post Share on other sites More sharing options...
Tjj226_Angel Posted July 1, 2012 Posted July 1, 2012 Have you tried running prime 95 on your CPU at stock speeds and settings. I am wondering if your CPU isn't damaged. What are your temps when you are at 3ghz? Share this post Link to post Share on other sites More sharing options...
Feel_IT Posted July 2, 2012 Posted July 2, 2012 (edited) well at stock i didnt run prime 95 but i have run it when i have oced to 3.0 and it didnt have any errors. Temp on 3.0 is arround 50 degres. I think this isnt so bad cause its pretty hoot in my country this days.I have run prime 95 on 3.0 with no errors for half hour. When i have it on 3.4 i get error after 2 seconds. Well i hope it isnt core cause its hard to get new one and this one dont have warranty anymore :S. guys i found something strange. In everest dram voltage was on 2.3V when on a stock i should have 1.8V. I have my cpu oced to 3.0. Everything is on auto . Is it just mistake in everest or does my rams really runs under 2.3V?? here is picture: http://shrani.si/f/1j/TG/1UNMcVVl/everest.png Edited July 2, 2012 by Feel_IT Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now