SpeedMax Posted May 10, 2011 Posted May 10, 2011 Hi Everybody, This is the first time I get into overclocking and I can't seem to even get a stable 3.75Ghz OC.. My system becomes unstable after 17 secs from Starting a LinX run with a problem size of 25000. Here's my bios template with the current 3.75Ghz OC..i'm planning to go to 4.0Ghz but at least I should get a stable 3.75Ghz Mother Board ( EVGA X58 4-Way Classified E-762 ) Bios ( 74 ) CPU ( 965EE ) CPU Cooler ( True 120 ) Memory (Mushkin XP3 7 8 7 20 ) PSU ( Corsair AX1200 ) GPU ( GTX580x2 ) Drivers ( 270.61 ) Operating System ( Windows 7 64 Ultimate ) Frequency Control CPU Clock Ratio ( 28X ) CPU Host Frequency (Mhz) ( 133 ) MCH Strap ( Auto ) CPU Uncore Frequency (Mhz) ( 3200Mhz { 24X } ) CPU Clock Skew ( 0 ps ) Spread Spectrum ( Disabled ) PCIE Frequency (Mhz) ( 100 ) Memory Feature Memory Speed ( Standard ) Memory Control Setting ( Enabled ) Memory Frequency ( 1600Mhz / 2:12 ) Channel Interleave Setting ( 6 Way ) Rank Interleave Setting ( 4 Way ) Memory Low Gap ( 2.5 ) tCL Setting ( 7 ) tRCD Setting ( 8 ) tRP Setting ( 7 ) tRAS Setting ( 20 ) tRFC Setting ( 88 ) Command Rate ( 1t ) Voltage Control EVGA VDroop Control ( Without VDroop ) CPU VCore ( 1.325 ) CPU VTT Voltage ( +100) CPU PLL VCore ( 1.800 ) IOH PLL VCore ( 1.800 ) DIMM Voltage ( 1.65 ) DIMM DQ Vref ( +0mV ) QPI PLL VCore ( 1.20 ) IOH VCore ( 1.2 ) IOH/ICH I/O Voltage ( Auto ) BR04 ( NF200) Voltage ( Auto ) VTT PWM Frequency ( 610 KHZ ) CPU PWM Frequency ( 1210 KHZ ) CPU Impedance ( Less ) ICH VCore ( Auto ) CPU Feature Intel SpeedStep ( Disabled ) Turbo Mode Function ( Enabled ) CxE Function ( Disabled ) Execute Disable Bit ( Disabled ) Virtualization Technology ( Disabled ) Intel HT Technology ( Enabled ) Active Processor Cores ( All ) QPI Control Settings ( Enabled ) QPI Link Fast Mode ( Enabled ) QPI Frequency Selection ( 4.800 GT/s ) OC Recovery ( Disabled ) Turbo Performance ( Disabled ) PnP/PCI PCI Express Maximum Payload Size ( 4096 ) Power Management Setup ACPI Suspend Type ( S3 ) HPET Support ( Enabled ) HPET Mode ( 64-bit ) Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now