thomasg76 Posted August 25, 2010 Posted August 25, 2010 Hi! I have been trying to get the RAM running at its designed speed for quite a few days now without much luck. My setup is: F3-16000CL9T-6GBRH (2Gx3) 6GB Asus P6X58D-E (Latest BIOS) i930 Corsair HX750 F3-Spinpoint 1TB XFX - 5870 Noctua U12P-SE2 I managed to get my system running for 6 hours after i had to abort with standard clock and XMP profile for the memory if i adjust the QPI to 1.5. It seems very high. Is this out of your guys experience "normal" and within the norm ? My temps where in the 80's. The guy from my local shop said thats far way to high, you should be under 60 (Sounds a bit low to me ) It pushes my heat already up a fair bit having the QPI that high so i won't be able to overclock the CPU too much with these settings. I also managed to get it overclocked to 4Ghz with the ram running at close to 1700 Mhz with the temps beeing 76-77C with CPU and QPI at 1.35 I haven't tried the combination of both but i am a bit worried about the temps. What is a good temp to run 24/7 id i wanna keep it for 3-5 years ? Are these temps normal with a good Air Cooler? Share this post Link to post Share on other sites More sharing options...
Guest SRwebSEO Posted August 25, 2010 Posted August 25, 2010 The H50 in my experience so far gives higher idle temperatures than my traditional Air Cooler but lower Load Temps. The nice thing I can say about it, is in situations where you run a good i7 system in a tight mid-tower (NZXT Lexa S with Full Fan Config) it gives you the ability to cool your CPU effectively. Thanks ! ! Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now